1 inch (25 mm) UPVC pipe: the main line from tank to bathrooms, price in Muzaffarpur
1 inch UPVC is the usual down-line from the overhead tank and the delivery line from a 0.5 HP pump. It is 25 mm nominal and 33.40 mm across. We keep Ashirvad 1″ pipe and Prince 1″ fittings; the rate is on the pipe rate board, or ask for today's price on WhatsApp below.
Three jobs a 1 inch pipe does in a house
1Down from the tank
Right after the tank's ball valve and the 40×25 reducer, 1″ runs down the shaft or outside wall and carries water for the whole house. Up to three bathrooms and the kitchen; more than that, stay at 1½″. Pipe size from tank to bathroom.
2Out of a 0.5 HP pump
The delivery line from a half-HP pump to the roof tank is usually 1″. For a 1 HP pump, 1½″. Near the pump use Sch 80 and a short metal piece first. Which pipe for the pump.
3Header on a floor
On a long floor with several rooms, a 1″ header runs along the passage and ¾″ branches leave it through reducing tees. Each branch gets its own ball valve.
Every step on a 1 inch line, left to right
- Reducer 40×25 steps the line down from 1½″ to 1″ right after the tank valve. Reducers and bushes.
- Reducing tee 25×15 takes a ½″ branch off the 1″ line; for ¾″ branches we order the tee. Tees.
- 1×½ reducing elbow and socket go from 1″ straight down to a tap-size pipe.
- MTA and FTA (Sch 80) end the pipe in a thread for a valve, pump or tank connector; Teflon tape on the thread, never solvent. MTA and FTA.
- End cap closes a line you will extend later, for a second floor, say.
Joints are solvent-welded with PVC solvent. Thread joints hold half the pressure of a solvent joint (Prince).
Which wall for a 1 inch line
| 1″ (25 mm) | Sch 40 | Sch 80 |
|---|---|---|
| Outside (mm) | 33.40 | 33.40 |
| Minimum wall (mm) | 3.38 | 4.55 |
| Pipe, kg/cm² | 31.60 | 44.25 |
| Fitting, kg/cm² | 18.95 | 26.55 (ours) |
Prince's figures at 23 °C, solvent-welded; the Ashirvad pipe carries its own rating on the print. A tank 10 m up gives about 1 kg/cm² and a house pump against a closed valve 3 to 4 kg/cm² (usual figures), so every number above is far enough. Use Sch 40 pipe down from the tank and Sch 80 near the pump. The full table is on Prince Easyfit Sch 40 and Sch 80.
1 inch CPVC is a different, smaller pipe
CPVC uses its own size system: a 1″ CPVC pipe is about 28.6 mm outside, while 1″ UPVC is 33.40 mm. They do not fit each other's fittings. CPVC is for hot water, so a house rarely needs it bigger than ¾″; 1″ CPVC is for a long hot-water header. We order CPVC pipe on request. Start at CPVC pipes and fittings and the
Prices are from our latest bill and change often. Please confirm today's rate on WhatsApp or call before buying.
CPVC size table.The 1 inch pipe and fittings we keep
We sell genuine Ashirvad and Prince with a GST bill. Any other 1″ fitting, we can order for you; ask on WhatsApp how long it takes.
Short answers
1 inch pipe ka rate kya hai?
The 1 inch rate is on the pipe rate board, per length, with GST on the bill. Prices change, so we do not print one here. For a quick answer, tap the WhatsApp button above and we reply with today's rate for the brand you want.
Is 1 inch the same as 25 mm?
Yes, as a name. The 25 mm is the nominal bore. The real outside of an ASTM 1″ pipe is 33.40 mm, so do not measure it with a tape and expect 25. A pipe that measures 25 mm outside is a different, metric pipe.
Is 1 inch enough for a 0.5 HP pump?
Yes, 1″ is the usual delivery line for a 0.5 HP pump; for 1 HP go to 1½″. The reasoning, with the suction side, is in which pipe for the pump.
How many bathrooms can one 1 inch down-line feed?
Up to three, plus the kitchen, on one or two floors (usual practice). More than that, go to 1½″. See pipe size from tank to bathroom.
Can I put Prince fittings on Ashirvad pipe?
Both are inch-size ASTM pipe, so the 1″ outside diameter is the same. Still, tell us which pipe you have when you order fittings and we hand you the matching ones. Use PVC solvent on the joint.
Can I use 1 inch UPVC for the geyser line?
No. UPVC stops at 60 °C. The geyser line is CPVC, and a house rarely needs it bigger than ¾″. See the geyser line guide.
Twenty years on sites around Muzaffarpur. The pressure and wall figures are Prince's own, checked on 18 Nov 2026; sizes by place in the house are usual practice and are labelled so.
Where the numbers come from
- Prince Pipes, Easyfit UPVC page: 1″ outside diameter 33.40 mm, minimum walls 3.38 and 4.55 mm, working pressure of pipe and fittings at 23 °C, threaded joint at 50%.
- Prince Pipes, CPVC technical manual (PDF): 1″ CPVC outside diameter about 28.6 mm.
- Valox Polyplast and Delight Polytech listings on IndiaMART and Aajjo: read to see how others list 1″ pipe; no price or figure taken from them.
- Tank, pump and branch sizes: pipe size from tank to bathroom and pipe for the pump (usual practice). Store facts: our own shelf at Rewa Road, 18 Nov 2026.
Get today's 1 inch rate
WhatsApp the brand and how many lengths you need, and we reply with today's price and when it can be ready.