हिंदी Call90310 74624
Home›Tiles›Anti-skid tiles
Tiles · outdoor · parking

Outdoor and parking tiles, 400×400 anti-skid: what a car needs under it, and the two we stock

The short answer

Under a car, use a thick tile with a dense body and a rough face, laid on a concrete base that slopes to a drain. Our Birla Pivot heavy-duty outdoor tile in 400×400 is 11.8 mm thick and comes in Sasa Beige and Hexa Grey. Never put a glazed or glossy floor tile in a parking. We sell genuine Birla Pivot with a GST bill.

11.8 mm
ThicknessAbout 12 mm, which is the minimum Orient Bell gives for cars.
8.61
sq ft per box5 tiles, 0.80 sq m, 21 kg a box (Pivot catalogue).
< 0.5%
Water absorptionPivot's sheet: under 0.5%. A dense body that takes in almost no water.
What a parking floor is made of
Cross-section of a tiled parking floor From the top: a car wheel, the 11.8 mm tile with a rough face and joints, a full mortar bed, a concrete base, and compacted earth. The floor slopes towards the drain. Car 1 2 3 4 Tile 11.8 mmMortar bedConcrete baseCompacted earth rough face, jointsfull, no hollowwith the slope in itno soft patch Fall to the drain or gate
Not to scale: the tile is drawn thicker than it is. Tile thickness and joints from Birla Pivot; the layers below are usual practice, and your mason sets their depth.
Thickness is the point

Why a car needs a thicker tile

A glazed floor tile is a thin printed skin over a body that can be porous. That is fine for a hall. It is not fine under a tyre.

Why the wrong tile cracks
Glazed floor tile cracking over a hollow, heavy-duty tile holding Left: a glazed tile with a thin glaze skin and a porous body, with a hollow under one corner; the corner cracks under a wheel. Right: a thicker dense tile on a full mortar bed, which does not crack. Glazed floor tile thin skin, softer body a hollow under the corner the corner snaps Heavy-duty tile thick, dense through full bed under every tile takes the wheel
Not to scale. The idea: weight lands on a small patch under the tyre, so the tile and the bed under it both have to take it.
Strength: Pivot's own parking-tile figures
Breaking strength in newtons Bars: the IS 4457 minimum of 1300 N, Pivot's 1800 N for a 10 mm parking tile and 4000 N for a 15 mm one. IS 4457 minimum: 1300 N Pivot, 10 mm parking tile: 1800 N Pivot, 15 mm parking tile: 4000 N A thicker tile breaks at a far higher load.
Birla Pivot catalogue, parking tiles table (pp. 63–64). The sheet states strength for 10 mm and 15 mm only; our 11.8 mm 400×400 sits between them and has no figure of its own.

Where makers disagree. Orient Bell says parking tiles run from 8 to 12 mm or more and that cars, trucks and heavy vehicles need at least 12 mm; the same page also suggests 8 to 10 mm for two-wheeler areas. Birla Pivot's 400×400 is 11.8 mm, within the ±4% thickness tolerance on its sheet of that 12 mm line. We take 12 mm as the line for a car. If a tractor, truck or loaded vehicle will park on it every day, tell us the vehicle before you buy.

Grip in the rain

The rough face, and what "R1" does and does not tell you

A smooth tile is a skid plate in rain. These tiles have a rough, rustic face: Birla Pivot lists the whole 400×400 range as Heavy Duty Outdoor, Rustic, and the product code of both ends in RT. The rough face grips a foot or a tyre, and it also holds water for a moment, so the floor must slope.

About "R1" in the name. Slip grades on tile boxes follow the DIN 51130 oil-ramp test and run R9 to R13: R9 is a slope of 6 to 10 degrees before a tester slips, R11 is 19 to 27. So R1 is not a grade on that scale, and Pivot's catalogue prints no slip number for these two tiles. We do not invent one. The honest test is simple: we wet the sample at the store and you stand on it in your chappal.

Two habits matter more than the grade. Give the floor a fall so water leaves, and sweep it where shade and a leaking tap keep it damp, because green algae makes any tile slippery.

Two designs, same tile

Sasa Beige or Hexa Grey

Both are the same Birla Pivot tile: 400×400 mm, 11.8 mm, rough face, 5 to a box. Only the print differs, so choose by what you see from the gate.

Sasa Beige 400×400 outdoor tile: a herringbone brick pattern in beige and terracotta with green joint lines

Sasa Beige

A herringbone of beige and terracotta bricks with green joint lines printed in. Warm and busy, so dust and small stains do not show. Suits a verandah and aangan as well as a porch.

400×40011.8 mm5 tiles · 8.61 sq ft a box
See Sasa Beige
Hexa Grey 400×400 outdoor tile: hexagons in grey, off-white and charcoal

Hexa Grey

Grey, off-white and charcoal hexagons. Cooler and calmer, and the mixed print takes oil and tyre marks better than one plain colour would. Suits a modern front.

400×40011.8 mm5 tiles · 8.61 sq ft a box
See Hexa Grey

These are two of dozens of designs in Birla Pivot's 400×400 heavy-duty range (Dovin, Zolo, Monte, Cadorna, Aera, Savona and more, catalogue pp. 55–58). Any of them can be ordered for you: ask on WhatsApp for the time it takes. Rates are on tile rates.

Laying

How a parking floor is laid so it lasts

Most broken parking tiles are not a tile fault. They are a hollow under the tile, or a base that moved. The base is the job; the tile only sits on it.

A 10 × 18 ft parking, seen from above
Plan of a tiled parking with its fall, edge and cut tiles A 10 by 18 foot floor with a 400 mm tile grid. The floor falls towards the gate and drain. A brick edge runs round three sides. The last row and column are cut tiles. Gate or drain side Brick edgeCut tilesFall holds the tiles inplan the last row and columnrain runs to the drain 10 ft wide, 18 ft long
A 400 mm tile is 1.31 ft, so 10 ft does not divide evenly: the shaded last column and row are cut tiles. The calculator below adds extra for them.
  1. Base firstCompact the earth and cast a plain concrete base with the fall built into it. Tiles follow the slope of the base; they cannot fix it. Depth of base: your engineer or mason.
  2. SlopeA fall of about 1 to 2 cm in every metre towards the drain or gate is usual practice. Put a string line on it before the mortar goes down.
  3. Full bed, no hollowLay each tile on a full bed of cement-sand mortar and butter the back of the tile as well. Tap it: a hollow sound means lift it and do it again. If your mason prefers adhesive it must be an outdoor grade, Tilestix Extero, which we order for you. The TX2 Intero Grip+ we keep on the shelf is for indoors only. Which Tilestix for which job.
  4. JointsLeave a joint between tiles; do not butt them. Fill with TileLynk, which takes joints of 1 to 6 mm. Keep a gap at the walls for the floor to move.
  5. EdgeFinish the open sides with a brick or concrete edge so the tiles cannot creep.
  6. WaitKeep the car off for about a week while the bed cures (usual practice). Then wash with water and a stiff brush; the rough face takes it.

These steps are usual practice. The makers' sheets give figures for the tile, not a method for the base, and the full method is in the

Prices are from our latest bill and change often. Please confirm today's rate on WhatsApp or call before buying.

tiles laying guide.

Your floor

How many boxes for my parking

Sold by the box: 5 tiles, 0.80 sq m (8.61 sq ft), about 21 kg. Put in your floor size in feet.

Floor area: 180 sq ft

Measure the whole floor, including where the car stands. Add 15% if you want a diagonal lay.

You need

Boxes——Ask today's rate per box
Tiles—5 to a box
Weight to carry—about 21 kg a box. Tell us the floor: it decides the vehicle
Send this on WhatsApp for today's price

Price is per box. Cutting and delivery are charged separately; ask for the amount for your site.

The other thing people search for

Tile or interlocking paver block?

People who search "interlocking tiles" usually want a paver. Honest answer: we sell tiles, not paver blocks. Each suits a different job.

Two ways to floor the outside
Tile floor and paver floor in cross-section Left: an 11.8 mm tile on a mortar bed on a concrete base on earth. Right: a thick paver block on a sand bed on a stone base on earth, with sand in the joints. 11.8 mm mortar bed concrete base compacted earth Tile thin, rigid, one piece with the base clean, matches the house floor cracks if the base moves 50–120 mm paver blocks sand bed stone base compacted earth Paver thick block, locks side to side can be lifted and laid again sand joints; base must drain
Not to scale. Paver thickness: BIS IS 15658 (precast concrete paving blocks), 50 to 120 mm; which thickness and grade a vehicle needs depends on the traffic class in the standard.
400×400 tilePaver block
Thickness11.8 mm50 to 120 mm
BedConcrete base and mortar, rigidStone base and sand, flexible
LookSmooth, clean, like the house floorBlock pattern, rougher
RepairBroken tile is chipped outLift blocks, relay (pipe or cable below)
Best forCar porch, verandah, aangan next to the houseLong driveway, large yard, daily truck or tractor
Do we sell itYes, both designsNo; ask a block-making unit near you

Our view: a car porch or aangan joined to the house is a tile job, because it should look like the floor inside. A long approach road or a yard where loaded trucks turn is a paver job, and we would rather tell you so than sell you a tile that will crack.

Beyond the car

Where else these tiles go

Verandah and aanganRough face for wet feet. Same laying, with less load on the bed.
Path to the gateA clear line from gate to door that stays safe when it rains.
Terrace walkwayThe slab must be waterproofed first; a tile does not stop a leak. See terrace tiles.
Not forIndoors, or a bathroom. For wet rooms see anti-skid tiles; for a car porch only, parking tiles.
Questions people ask us

Short answers

Which tile is best for car parking?

A thick tile of about 12 mm, with a dense body (water absorption under 0.5%) and a rough face, laid on a concrete base with a slope. We stock the Birla Pivot 400×400 heavy-duty outdoor tile in Sasa Beige and Hexa Grey, 11.8 mm thick.

How thick should a parking tile be?

Orient Bell says at least 12 mm for cars, trucks and heavy vehicles. Birla Pivot's 400×400 is 11.8 mm, within the ±4% thickness tolerance on its sheet. That is right for a car porch. If a truck or tractor will park on it daily, tell us the vehicle first.

Can I use a glossy 2×2 vitrified tile in my parking?

No. A polished face is smooth and skids when wet, and Pivot lists separate heavy-duty and parking tiles for vehicle areas. Glazed and polished tiles are for indoor floors.

What does R1 mean on Sasa Beige and Hexa Grey?

It is not a grade on the standard slip scale, which runs R9 to R13 (DIN 51130). Birla Pivot's catalogue prints no slip rating for these two tiles, so we do not quote one. Both have a rough rustic face; wet the sample at our store and stand on it.

Are these tiles slippery in rain?

The rough face grips far better than a smooth tile, but no tile stays safe if water stands on it or algae grows. Give the floor a fall, and sweep it where shade keeps it damp.

Should I use tiles or interlocking paver blocks?

Tiles for a car porch or aangan joined to the house, where you want a finished look. Pavers for a long driveway or a yard with daily truck or tractor traffic. We sell tiles, not paver blocks.

How many boxes do I need for a 10 × 18 ft parking?

180 sq ft plus 10% for cuts is 198 sq ft. At 8.61 sq ft a box that is 23 boxes, or 115 tiles. Use the calculator on this page for your own size.

Can I use these tiles on a terrace?

Yes, after the slab is waterproofed, with a fall to the outlet and flexible joints. A tile alone does not stop a leak. See the terrace tiles page.

Mr Mustafaa
Paint Engineer, Tashya Ventures

Paint Engineer at our Reva Road store, Muzaffarpur. The tile figures on this page come from Birla Pivot's own catalogue, checked on 12 Nov 2026. Where the makers disagree, the page says so and gives the safer figure.

Where the numbers come from

  1. Birla Pivot, Tiles consolidated catalogue: pp. 51–58, Heavy Duty Outdoor Tiles, Rustic, 400×400 (Sasa Beige, Hexa Grey and other designs); pp. 63–64, parking tiles technical details (water absorption under 0.5%, breaking strength 1800 N at 10 mm and 4000 N at 15 mm, thickness tolerance ±4%) and packing (400×400: 11.8 mm, 21 kg, 5 tiles, 0.80 sq m, 8.61 sq ft per box).
  2. Orient Bell, Parking tiles: thickness 8 to 12 mm or more, at least 12 mm for cars, trucks and heavy vehicles, textured finish for grip. The same page also gives 8 to 10 mm for two-wheelers.
  3. NBS, Pendulum, ramp and Tortus slip resistance test methods: the R9 to R13 scale of the DIN 51130 ramp test, run with oil, and its limits.
  4. Bureau of Indian Standards, implementation guidelines for revised IS 15658 (Feb 2021): precast concrete paving blocks, grades from M 30 up, thickness from 50 mm up to 120 mm.
  5. Asian Granito, Best parking tile ideas, and a Material Depot 400×400 parking tile listing: another seller's 400×400, 12 mm, matte parking tiles, five to a box, for comparison. We read the listing in search results, not the full page.

Send us your floor size

We will reply on WhatsApp with the boxes, today's price and delivery to your site.

TASHYABUILDING SOLUTIONS · MUZAFFARPUR
WhatsApp 90310 74624tashyaventures.com