हिंदी Call90310 74624
Home›Paint and putty
Category · Birla White · Rewa Road, Muzaffarpur

Wall putty and Birla White in Muzaffarpur: which one for your wall

The short answer
  • Dry inside wall → WallCare putty (or Lemon putty)
  • Outside wall, or a bathroom wall above the tiles → Waterproof putty
  • Wavy or patched wall → Levelplast first, then putty
  • Raised pattern on a wall → Textura trowel finish

Putty is a thin white skim that makes plaster smooth so paint needs less and looks better. Pick by the wall, not by the price. Tiles, joints and white work have their own bags further down. Every product here can be ordered: if it is not on the shelf today, ask on WhatsApp and we tell you how long it takes. GST bill on every sale.

2
Coats of puttyBoth together no thicker than 1.5 mm.
17–20
Sq ft per kgWallCare, two coats. Waterproof: 16–19.
9
Bags on this pagePutty, plaster, texture, primer, white cement, tile adhesive, grout.
Which bag goes on which part of a house
Parapet Bedroom Bathroom Block wall Front wall Outside wall 1223456
Numbers match the list below. Not to scale.
  1. 1Bedroom, hall, stairs: WallCare or Lemon putty, then primer and paint
  2. 2Bathroom wall above the tiles and outside wall in the rain: Waterproof putty
  3. 3Bathroom wall tiles: TileStix to fix, TileLynk for the joints
  4. 4Front or feature wall with a pattern: Textura trowel finish
  5. 5Wavy, patched or block wall: Levelplast, then putty
  6. 6Parapet top, marble, art work: white cement
Pick for your wall

Three questions, and you know the putty

Answer for the wall you are about to do. Skip this if it is a tile or white-work job; see the table after it.

Where is the wall?
Has it shown damp or seelan?
Is the plaster even?
Your wall needs

    Order of work: Levelplast only where the wall is wavy, then primer, putty, primer and paint. Full order and gaps.

    On our shelf

    Every product, with its own page

    Each card shows the pack sizes we keep, the one figure that matters, and the page with the full detail. Today's price for every pack is on the putty and white cement rate board.

    Putty

    Prices are from our latest bill and change often. Please confirm today's rate on WhatsApp or call before buying.

    Birla White WallCare putty

    In stock
    1, 5, 20, 40 kg

    The everyday putty for dry inside walls: new plaster or a repaint.

    17–20 sq ft per kg in two coats
    tashyaventures.com/putty/birla-white-wallcare
    Ask today's rateper 20 kgFull pageAsk price
    20 kg

    WallCare with a lemon fragrance. Same walls, same two thin coats.

    Same as WallCare: 17–20 sq ft per kg
    tashyaventures.com/putty/birla-white-lemon-putty
    Ask today's rateper 20 kgFull pageAsk price
    40 kg stocked; 1, 5, 20, 30 kg to order

    Outside walls, the room side of a bathroom wall, walls that sweat in the monsoon. It does not stop a leak.

    16–19 sq ft per kg in two coats
    tashyaventures.com/putty/birla-white-waterproof-putty
    Ask today's rateper 40 kgFull pageAsk price
    Before and after putty
    20 kg

    Ready-mix plaster that levels a wavy or patched wall before putty. Putty then goes on top.

    Up to 6 mm a layer, 20 mm in all, no curing
    tashyaventures.com/putty/birla-white-levelplast
    Ask today's rateper 20 kgFull pageAsk price
    20 kg

    A white raised-pattern coat put on with a trowel, painted over after. Birla White's page lists interior surfaces; for an outside front, ask us first.

    3.5–4.5 sq ft per kg per coat on a smooth base
    tashyaventures.com/putty/birla-white-textura
    Ask today's rateper 20 kgFull pageAsk price
    20 L stocked; 1, 4, 10 L to order

    The primer that goes over dry putty inside, before paint. Outside walls take Birla Opus primers; see the paint pages.

    170–200 sq ft per litre per coat on putty
    tashyaventures.com/putty/birla-white-activcoat-primer
    Ask today's rateper 20 LFull pageAsk price
    White cement, tiles and joints
    1, 5, 25, 50 kg

    For marble and light stone, wide joints, a cement wash on plaster and art work. Not a putty.

    Whiteness 89%+ on the Hunter scale
    tashyaventures.com/putty/birla-white-cement
    Ask today's rateper 50 kgFull pageAsk price
    20 kg; Vitribind and Extero to order

    Fixes ceramic tiles up to 450 × 450 mm indoors. Big vitrified, plank and outdoor tiles need the other TileStix grades.

    55–60 sq ft per bag at a 3 mm bed
    tashyaventures.com/putty/tilestix-adhesive
    Ask today's rateper 20 kgFull pageAsk price
    What a bag covers

    One bag, how many square feet

    Taken from Birla White's own figures. Putty is two coats; Textura is one coat; the tile adhesive is tile area at a 3 mm bed. Plan on the low end for a rough wall.

    What one bag covers
    WallCare 40 kg2 coats 680–800 sq ft Waterproof 40 kg2 coats 640–760 sq ft WallCare / Lemon 20 kg2 coats 340–400 sq ft Textura 20 kg1 coat 70–90 sq ft TileStix TX2 20 kgtile area 55–60 sq ft
    Solid bar = low figure; lighter extension = high figure. Sq ft.

    To turn a room into bags, use the how many bags guide or the paint calculator. Birla White's pages give different coverage figures for the same putty; we plan on the lowest.

    Not smoothing a wall?

    Tiles, joints and white work

    Your jobThe bagNote
    Fix tiles up to 450 × 450 mm indoorsTileStix TX2Putty never goes under tiles.
    Fix 600 × 600 vitrified, planks, 600 × 1200 or outdoor tilesTileStix Vitribind or ExteroWe order these; ask the time on WhatsApp.
    Fill 1–6 mm tile jointsTileLynk groutChoose the colour with the tile.
    Marble, light stone, wide joints, cement wash, art workBirla White cementCheapest per kg in the 50 kg pack.
    Not sure whether tile needs cement or adhesiveTiles: cement or adhesiveShort guide.
    Wrong bag for the job

    Four mix-ups we see at the counter

    PlasterPuttyTile

    Putty under tiles

    Putty under tile: the tile lifts

    Putty is a weak, smooth skim. Tiles go on TileStix, straight on the cured base. TileStix page

    BaseTX2 bedBig tile

    TX2 on a big or outdoor tile

    TX2 under a big tile: it lifts at the edges

    TX2 is for ceramic up to 450 × 450 indoors. A 600 × 1200 or outdoor tile needs Extero. Which bag for which tile

    PlasterPuttyLeak behind

    Waterproof putty on a leaking wall

    Water behind putty: it blisters

    It resists water landing on the face. Water from behind still blisters it. Fix the source first. Putty on a seelan wall

    PlasterPutty

    Putty to fill a dip

    Putty over a dip: it cracks

    Both putty coats together stay under 1.5 mm. Dips are filled in the plaster, or with Levelplast. Levelplast page

    Questions people ask us

    Short answers

    Which putty for inside walls?

    WallCare, or Lemon putty, which is WallCare with a lemon fragrance. Two thin coats, both together no thicker than 1.5 mm, then primer and paint.

    Which putty for outside walls?

    Waterproof putty. The Birla Opus exterior sheets only ask for holes and dents to be filled, so a full putty coat outside is optional.

    What is the price of 40 kg putty?

    We do not print an old price on a page. Today's price for every pack, with GST, is on the putty and white cement rate board, with the time it was entered. You can also ask on WhatsApp.

    Do I need Levelplast?

    Only if the plaster is wavy, patched or very rough. Putty cannot fill dips. Levelplast goes on first, up to 6 mm a layer and 20 mm in all, and putty goes on top.

    Is Textura for outside walls?

    Birla White's Textura page lists interior surfaces. For an outside front, ask us on WhatsApp with a photo of the wall before you order.

    A product or pack that is not on the shelf?

    Every product here can be ordered. Ask on WhatsApp for the time it takes. Birla White also makes other putties and packs; we can order those too.

    Is it genuine, and do I get a bill?

    We sell genuine Birla White with a GST bill on every sale.

    Mr Mustafaa
    Paint Engineer, Tashya Ventures

    Paint Engineer at our Rewa Road store, Muzaffarpur. The coverage, pack and use figures on this page come from Birla White's own pages; the product pages linked above carry the detail and the sources.

    Where the numbers come from

    1. Birla White, WallCare putty and step-by-step process: 17–20 sq ft per kg, two coats, 1.5 mm in all, not a levelling material.
    2. Birla White, WallSeal Waterproof putty: 1.49–1.77 sq m per kg, exterior and moisture-prone walls.
    3. Birla White, Levelplast: up to 6 mm a layer, up to 20 mm in all.
    4. Birla White, Textura trowel finish: interior surfaces listed, paintable, no curing; coverage 3.5–4.5 sq ft per kg per coat on an ideal smooth surface (technical table, read through a search summary).
    5. Birla White, ActivCoat Interior primer: 170–200 sq ft per litre per coat on putty.
    6. Birla White, TileStix Intero Grip+ and TileLynk: tile sizes, 55–60 sq ft per bag, joints 1–6 mm.
    7. Birla White, white cement: Hunter whiteness above 89%.

    Tell us the wall, we'll send the list

    Send a photo of the wall and its size. We reply with the right bags and today's price on WhatsApp.

    TASHYABUILDING SOLUTIONS · MUZAFFARPUR
    WhatsApp 90310 74624tashyaventures.com