POP on bathroom or kitchen walls
The mason says POP is smoother and quicker. It looks fine for a season. Daily steam then softens the gypsum under the paint. Waterproof putty above the tiles avoids it.
POP gives the glassiest finish and hides dips, which is why masons like it. But it is gypsum, and gypsum goes soft when it stays damp. In Muzaffarpur's humid months, on a ground floor or near a bathroom, that is what decides it. The wall finish that survives the monsoon is putty.
Putty figures are from Birla White's WallCare leaflet, the putty we sell. POP figures are from Saint-Gobain Gyproc, India's largest gypsum maker, and Birla White's own putty-vs-POP page. Green is the better side for a Bihar wall.
| White-cement putty | POP punning | |
|---|---|---|
| Made of | White cement with polymers | Gypsum (plaster of Paris) |
| How thick | 2 thin coats, at most 1.5 mm togetherBirla White: not a levelling material | 3–6 mm, one coatGyproc. Fills dips and waves |
| Finish | Smooth, white | The smoothest, glass-likeWhat masons and buyers like about it |
| Damp and water | Water-resistantWater absorption ≤ 0.8 ml in 24 h (Karsten tube, 28 days) | Softens when it stays dampBirla White: not for moist surfaces |
| Where the maker allows it | Inside and outside walls | Inside onlyGyproc: "only be used on Internal Walls" |
| Strength, dry | 3.5–7.5 N/mm²compressive, 28 days | 4–8 N/mm²Gyproc, lab figure |
| Working time once mixed | Use within 2–3 hoursinitial set ≥ 100 min | 10–25 minutesBirla White: 10–12 · Gyproc: 15–25 |
| Before applying | Wet the wall firstBirla White: never on a dry surface | Plaster must be dust-free and sound |
| Curing with water | Not needed | Not needed |
| Ready for primer | Overnight, 10–12 h after the last coat | 3–5 days to dryGyproc, in normal weather |
| Before paint | Primer, then 2 coats of paint | Thin putty (optional), primer, then paintGyproc's own advice |
| What it needs from the mason | Two passes and light sanding | A fast, skilled hand; it sets as he works |
Strength is about the same on paper. The real difference is not hardness when dry, it is what each one does when it gets wet. Birla White's putty-vs-POP page gives putty a working time of 10–45 minutes, shorter than its leaflet's 2–3 hours; mix small batches and it won't matter.
Both powders turn hard when mixed with water. What happens when water comes back later is the whole difference.
White cement hardens by reacting with water, and the reaction does not undo itself. WallCare also carries polymers that keep water out. Birla White lists it for outside walls as well as inside ones.
Plaster of Paris is gypsum with its water driven off by heat. Add water and it sets back into gypsum. But gypsum dissolves a little in water, so a POP layer that stays damp loses strength, powders, and lets go of the paint. That is why Gyproc keeps it inside only.
Long monsoon humidity. Ground floors where water rises from the plinth. Bathrooms and kitchens with steam every day. Flat roofs that leak at the first crack. Those are exactly the places POP fails first.
The maker's own hint: Saint-Gobain sells a separate moisture-resistant gypsum plaster, Elite MR, "designed to provide protection in wet areas like bathroom, kitchens, basement". If ordinary gypsum were fine there, it would not need one. POP from the local market is the ordinary kind. If your wall already shows damp, fix the water first: putty on a seelan wall.
A two-storey house cut open. Walls are putty almost everywhere. POP gets a few dry ceilings.
False ceilings: POP is still used for cornices, mouldings and false ceilings built of POP itself. A false ceiling made of gypsum boards is different: Saint-Gobain fills its joints with a gypsum jointing compound and paper tape (Easi-Fill), not loose POP.
A bag of POP costs less per kg than putty. But punning goes on two to four times thicker, so each square foot takes far more material. Compare the full price per sq ft, material and labour, never the bag.
| What you pay for | Putty | POP |
|---|---|---|
| Price per kg | Higher | Lower |
| Material per sq ft | Thin skim: 17–20 sq ft per kg for 2 coats | 2–4 times the thickness |
| Labour | Two coats and sanding, overnight gap | One coat, but a skilled, fast mason |
| Days before paint | Next day | 3–5 days |
| Uneven wall | Needs Levelplast or plaster repair first | Punning fills it |
| Redo in a damp spot | Rare | Scrape off, wait, redo, repaint |
Each picture shows the layers on the left (the red one is the mistake) and the wall a few months later on the right.
The mason says POP is smoother and quicker. It looks fine for a season. Daily steam then softens the gypsum under the paint. Waterproof putty above the tiles avoids it.
Water rising from the plinth keeps the bottom of the wall damp for months. Gypsum loses its grip first. Fix the damp, let the wall dry, then waterproof putty. Read putty on a seelan wall.
Told "no POP", some masons fill the dips with putty instead. Birla White caps both coats at 1.5 mm and says WallCare is not a levelling material. Level the wall with Levelplast or fresh plaster first.
Prices are from our latest bill and change often. Please confirm today's rate on WhatsApp or call before buying.
Birla White WallCare puttyWalls and ceilings · 17–20 sq ft/kg, 2 coats₹ 774per 40 kg Birla White Waterproof puttyBathrooms, damp ground floor, outside · 40 kg₹ 1,405per 40 kgFull order of layers and drying gaps: putty, primer, paint. Other comparisons: putty vs white cement · putty vs gypsum plaster.
For walls in a Bihar house, white-cement putty. It is water-resistant and goes inside and outside. POP is gypsum, and Saint-Gobain Gyproc says gypsum plaster is for internal walls only. POP is fine on dry inside ceilings and for decorative work.
POP punning is a 3 to 6 mm coat of gypsum plaster over cement plaster (Saint-Gobain Gyproc). It sets in minutes and hides dips. Putty is a white-cement skim of two thin coats, no more than 1.5 mm together (Birla White). It smooths; it does not level.
No. Steam and splashes soften gypsum. Saint-Gobain sells a separate moisture-resistant plaster for bathrooms and kitchens, which tells you the ordinary one is not for them. Use putty there, and waterproof putty on walls that get wet.
Yes, once the POP is fully dry. Saint-Gobain Gyproc says gypsum plaster dries in 3 to 5 days in normal weather, then takes an optional thin coat of putty and one coat of primer before paint. On damp or powdery POP, nothing holds: scrape it off.
Don't. The thick levelling coat goes under, the thin finishing skim goes on top. Putty is the last smoothing layer before primer. If the wall needs levelling after putty, the plaster under it was the problem.
A bag of POP costs less per kg. But punning goes on 3 to 6 mm thick against at most 1.5 mm for putty, so a POP wall needs two to four times the thickness of material, and it waits 3 to 5 days before paint. Compare rupees per sq ft with material and labour. Today's prices: putty rates.
On a dry inside ceiling either works, and POP gives the smoothest finish. Not under a roof that leaks, and not in a bathroom or kitchen. Gypsum-board false ceilings use the board maker's jointing compound and tape at the joints.
Not by the makers' figures. WallCare's compressive strength is 3.5–7.5 N/mm² (Birla White leaflet); Gyproc gives 4–8 N/mm² for its gypsum plaster. Dry, they are about the same. Wet, putty keeps its strength and gypsum loses it.
Putty for the skim, POP only on dry ceilings, and white cement on its own is a wash, not a putty. The full comparison: putty vs white cement. More questions: putty and white cement FAQ.
Paint Engineer at our Reva Road store, Muzaffarpur. Every number on this page was checked against the maker's own sheet on 12 Nov 2026. Where two sheets disagree, the page says so and goes with the safer figure.
Send a photo of the wall or ceiling on WhatsApp. We'll tell you putty, waterproof putty or POP, and the quantity with today's price.