हिंदी Call90310 74624
Home›Putty›Birla White WallCare
Putty · Birla White · in stock

Birla White WallCare putty in Muzaffarpur: which pack, how much it covers, and today's price

The short answer

WallCare is our everyday putty for dry inside walls. Two thin coats make the wall smooth for paint. Plan on 17 to 20 sq ft per kg, so one 40 kg bag does about 680 to 800 sq ft. We keep 1, 5, 20 and 40 kg; today's price for each is on the putty rate board, with GST on the bill.

17–20
sq ft per kgfor two coats on ordinary plaster. Take 17 on a rough wall.
1.5 mm
Both coats togetherThicker does not make it better; it cracks.
36–38%
Water by weightAbout 15 litres to a 40 kg bag.

Walls that get wet (bathroom side, outside, ground floor) are a different putty: WallCare or Waterproof.

What one bag does
One 40 kg bag of WallCareA 40 kg bag plus about 15 litres of water covers 680 to 800 square feet in two coats, about the walls of two 10 by 10 foot rooms. WallCare 40 kg one bag + ≈ 15 L 36–38% by weight 680–800 sq ft two coats · 17–20 sq ft per kg ≈ 363 sq ft of wall ≈ 363 sq ft of wall
A 40 kg bag with about 15 litres of water gives 680–800 sq ft in two coats. That is the walls of two 10 × 10 ft rooms, one door and one window each.
Which walls

WallCare for dry walls inside. Something else when water is involved.

Birla White's WallCare page lists interior walls. Its pitch: whiteness from white cement, polymers that resist moisture and flaking, and no solvent smell (it says zero VOC).

Use WallCare

Bedrooms, hall, stairs, ceilings under a sound roof, new plaster or a repaint. This is most of a house.

Use Waterproof putty

Outside walls, the room side of a bathroom wall, ground-floor walls that have shown damp. We keep Birla White Waterproof putty in 40 kg.

Fix the water first

If a wall is wet now, no putty holds. Stop the leak, let it dry, then see putty on a seelan wall.

Two things WallCare is not. It is a finishing coat, not a levelling material: a rough or uneven plaster needs repair first (we also keep Levelplast, a ready-mix plaster). And it is not a replacement for primer; paint does not go straight on putty. The order is in putty, primer, paint. Thinking of POP instead? Putty or POP.

What a 40 kg bag covers, by source
What Birla White and others say a 40 kg bag coversBirla White pages give between 600 and 880 square feet per 40 kg bag. A price blog says 1,000 to 1,200, which no Birla White page says. We plan on 680.Product page · 1.86–2.04 m²/kg800–878Estimate blog · 20–22 sq ft/kg800–880Putty-work blog · 17–20 sq ft/kg680–800Same blog · 1.5–2.0 m²/kg646–86140 kg pack guide · 600–800600–800Price blog, not Birla White1,000–1,2006008001,0001,200We plan on 680sq ft per 40 kg bag
Square feet per 40 kg bag, from each source's own per-kg or per-bag figure (1 m² = 10.76 sq ft).
Coverage

Birla White gives four different numbers. Use the lowest.

Its product page says 1.86–2.04 sq m per kg. One blog says 20–22 sq ft per kg, another says 17–20, and its pack guide says 600–800 sq ft for a 40 kg bag. Some price blogs go higher still, to 1,000–1,200 sq ft; no Birla White page says that.

We plan on 17 to 20 sq ft per kg for two coats. Use 17 where the plaster is rough or the wall is old, because a rough wall drinks putty. A 40 kg bag is then 680 to 800 sq ft. If your quote from a shop assumes more than that, ask what wall it assumes.

To turn this into bags for your own rooms, with the door and window taken off: how many bags of putty. It also has the rate per sq ft. How many coats and why two: putty kitne coat.

On our shelf

The packs we keep, and what each is for

Coverage is at 17–20 sq ft per kg, two coats. Today's price for each pack, per kg too, is on the

Prices are from our latest bill and change often. Please confirm today's rate on WhatsApp or call before buying.

putty and white cement rates.

WallCare 1 kgPatches and cracks · 17–20 sq ft₹ 36per 1 kg
WallCare 5 kgOne wall or a small room · 85–100 sq ft₹ 167per 5 kg
WallCare 20 kgA room of 10 × 10 ft · 340–400 sq ft₹ 481per 20 kg
WallCare 40 kgTwo rooms or a flat · 680–800 sq ft₹ 774per 40 kg
Lemon putty 20 kgWallCare with a lemon fragrance₹ 435per 20 kg

Birla White also makes WallCare in 10 and 30 kg. We do not keep them, but we can order them for you. Unopened, WallCare keeps 12 months from the date of manufacture (Birla White), stored dry and off the floor.

Water for each pack

Birla White says 36–38% water by weight. The arithmetic for each pack:

PackWater to add
1 kg0.36–0.38 L
5 kg1.8–1.9 L
20 kg7.2–7.6 L
40 kg14.4–15.2 L

Add putty to water, not the other way round, and mix only what can be spread in 2 hours. Method and tools: putty mixing.

WallCare on the wall
WallCare on the wall, step by stepWet the wall, mix with 36 to 38 percent water, first coat, wait at least 3 hours, second coat, dry 10 to 12 hours, sand, then primer.1Wet the walldamp, no water standing or dripping2Mix36–38% water by weight; use within 2–3 h3First coatthin, spread flat4Wait at least 3 hourstouch-dry is not enough, so use the clock5Second coatboth coats together no thicker than 1.5 mm6Dry 10–12 hoursovernight · no water curing needed7Sand, then primerfiner paper, dust off, then ActivCoat
The gaps are Birla White's: at least 3 hours between coats and 10–12 hours before primer.
On the wall

Wet wall, two thin coats, no curing

Birla White asks for the wall to be wetted before putty goes on, damp but with no water standing. It does not need water curing afterwards. Mixed putty is used up within about 2 to 3 hours (the step-by-step post says up to 3.5), so a painter who mixes a full bag at once wastes the end of it.

The first coat goes on, then at least 3 hours, then the second. Both coats together stay under 1.5 mm. After the last coat, 10–12 hours of drying, a light sanding, and primer. Which primer, and the days a whole room takes: putty, primer, paint. Primer for the room: ActivCoat Interior primer.

A painter who wants thick putty to hide a bad wall is solving it the wrong way. Repair the plaster, then put WallCare on a sound surface.

Lemon putty

Lemon putty is WallCare with a lemon scent

Birla White sells it as WallCare with a lemon fragrance. You mix it, apply it and cover it the same way, and the coverage figures above apply. We keep the 20 kg bag. If a room is being painted while the family lives in it, the scent is the reason people ask. Lemon putty page.

Questions people ask us

Short answers

What is the Birla White putty 40 kg price in Muzaffarpur?

Our price for the day is on the putty rate board, for every pack, per kg too, with GST on the bill. Prices elsewhere change with the shop, the day and the carriage, so we do not quote one from memory. A 40 kg bag covers 680–800 sq ft in two coats.

How much does a 40 kg bag of WallCare cover?

680 to 800 sq ft in two coats, at Birla White's 17–20 sq ft per kg. Its other pages give up to about 880. We plan on the lower figure so you do not run short. For your own rooms: how many bags.

How many coats of WallCare?

Two thin ones, together no thicker than 1.5 mm, with at least 3 hours between them. More about it: putty kitne coat.

Is WallCare waterproof?

Birla White says its polymers protect against moisture, but WallCare is not the waterproof putty. For walls that meet rain or damp, Birla White makes WallSeal Waterproof. Neither stops a leak. The two compared.

Can I use WallCare on outside walls?

Birla White's WallCare page lists interior walls. For outside walls that take rain we give the Waterproof putty.

Do I need to wet the wall, or cure the putty?

Wet the wall before putty, no water standing. Do not cure the putty afterwards; Birla White says it needs no curing.

Is Lemon putty different from WallCare?

No. It is WallCare with a lemon fragrance, used the same way. We keep it in 20 kg.

Can I paint straight on WallCare?

No. Put primer on first, whatever the colour. The order and the gaps: putty, primer, paint.

Birla White or JK putty?

The side-by-side is on Birla White vs JK putty. We sell Birla White, with a GST bill.

Mr Mustafaa
Paint Engineer, Tashya Ventures

Paint Engineer at our Reva Road store, Muzaffarpur. The figures here are Birla White's own, checked on 13 Nov 2026. Where its pages disagree, the page says so and takes the safer one.

Where the numbers come from

  1. Birla White, WallCare putty page: interior walls, 1.86–2.04 sq m per kg, zero VOC, polymers; FAQ on wetting the wall and no curing.
  2. Birla White, Wall putty work: step-by-step process (25 Sep 2026): 36–38% water, 3–3.5 h pot life, 3 h between coats, 10–12 h before primer, 1.5 mm total, 17–20 sq ft per kg.
  3. Birla White, How to estimate your wall putty needs: 20–22 sq ft per kg.
  4. Birla White, Guide to Birla putty 1 to 40 kg packs: 600–800 sq ft for 40 kg; pack sizes 1, 5, 10, 20, 30, 40 kg.
  5. NoBroker, Birla White putty 40 kg price: the 1,000–1,200 sq ft claim, shown on the chart for comparison only.
  6. Store facts: our own shelf at Rewa Road; Lemon putty and WallCare packs as stocked.

Send us your room sizes

We'll tell you how many kg of WallCare, which packs to buy, and today's price, on WhatsApp.

TASHYABUILDING SOLUTIONS · MUZAFFARPUR
WhatsApp 90310 74624tashyaventures.com