हिंदी Call90310 74624
Home›Products›Roofing sheets
Roofing sheets · chadar

Cement roofing sheets (chadar) in Muzaffarpur: Everest and Charminar, 6 to 12 feet

The short answer

We stock corrugated fibre-cement sheets from two makers: Everest (grey) and Charminar (white; made by BirlaNu, the company that used to be HIL). Every sheet is 6 mm thick and 1.05 m wide and comes in four lengths, sold by the foot.

Sold asLengthWeightPurlins
6 ft2 m25 kg2
8 ft2.5 m31–32 kg3
10 ft3 m37–38 kg3
12 ft3.6 m44–46 kg4

Today's price per sheet: roofing sheet rates. Any length, colour or accessory we don't hold can be ordered; ask on WhatsApp.

91%
A 3 m sheetcovers 2.88 m² of roof after the laps. Buy about 10% more than the roof area.
1.4 m
Most between purlinsEverest's figure for 6 mm sheets. We use it for both makers.
12.3–12.7
kg per metreCharminar's figure. A 12 ft sheet is a two-person lift.
The four lengths, to scale
The four sheet lengths drawn to scaleFour bars 2, 2.5, 3 and 3.6 metres long with red dots showing where the purlins go: 2, 3, 3, and 4 purlins.6 ft · 2 mabout 25 kg8 ft · 2.5 mabout 31–32 kg10 ft · 3 mabout 37–38 kg12 ft · 3.6 mabout 44–46 kg0 m1 m2 m3 mpurlin (support) under the sheet
Red dots: where the purlins go under each length. Worked from Everest's limits (at most 1.4 m between purlins, at most 0.3 m of sheet past the last one).
Which length

Pick the length for the job, then count the rows

Same sheet, four lengths. A longer sheet means fewer rows, fewer laps and fewer places to leak, but it is heavier and needs more purlins under it.

6 ft · 2 m

6.6 ft exactly
25 kg2 purlins1.85 m² of roof

Verandas, small sheds, trough covers, extensions. Also the short top row where a longer sheet would overhang.

8 ft · 2.5 m

8.2 ft exactly
31–32 kg3 purlins2.35 m² of roof

Room-width sheds and the usual cowshed sheet. Three purlins give it a firm hold.

10 ft · 3 m

9.8 ft exactly
37–38 kg3 purlins2.85 m² of roof

The size the makers quote their coverage for. House veranda or a two-room shed.

12 ft · 3.6 m

11.8 ft exactly
44–46 kg4 purlins3.45 m² of roof

The biggest search of all sizes. One sheet takes a small shed slope in one go: fewer laps, fewer leaks. Two people to lift, a vehicle to carry.

Rule of thumb: choose the longest sheet your slope takes in whole rows. If a row leaves a short gap at the top, close it with a 6 ft sheet instead of buying one more 12 ft. Weights use Charminar's 12.3–12.7 kg per metre; Everest does not publish a weight for its standard sheet, and its Hi-Tech page gives 13.5 kg per m², which is about 14 kg per metre. When you plan the lift, add 12%: a 12 ft sheet can be about 51 kg.

Everest or Charminar

The two makers, side by side, from their own pages

Neither maker shows a price, a Hindi page or a sheet-count tool. Here is what each does publish, and where one is silent.

EverestCharminar (BirlaNu)
Colour we stockGreyWhite
Lengths the maker lists1.5 to 3.6 m2.5 m is named in its FAQ1 to 4.25 m
Width1.05 m, cover 1.01 m1.05 m, cover not stated
Thickness6 mmits purlin figures are "for 6 mm"6 mm
WeightNot published for the standard sheetHi-Tech line: 12.44 kg/m12.3–12.7 kg per metre
WaveNot publishedPitch 146 mm, depth 48 mm
Covered after laps91% for 3 m (2.88 m²)91% for 3 m, 87% for 1.5 m
LapsEnd 150 mm at least, side 44 mma photo caption says 40 mmNot published
Purlins and overhang1.4 m apart, 0.3 m overhang, at mostNot published
Standard quotedNoneIS 459:1992
AsbestosStandard line: a photo caption says "asbestos fibre cement", the text is silent. Hi-Tech line: non-asbestos (PVA fibre).Standard line: not stated. Fortune line: asbestos-free.
Life"Minimum 40 years""Decades"

Where Charminar is silent

Its page gives no laps or purlin spacing. Its 91% and 87% figures match a 150 mm end lap and a 1.01 m cover, which are Everest's numbers, so we use Everest's limits for both. They are the stricter side.

Where the makers disagree

Side lap: 44 mm in Everest's table, 40 mm in its caption. We count sheets with a 1.0 m cover, a little under both, so you do not run short. Hi-Tech weight: 12.44 kg/m in one place, 13.5 kg/m² in another. Plan the lift for the heavier.

Which one?

Same size, same thickness. Choose by colour and by the day's price on the rate page. Keep one maker on one roof so the waves and laps match. Details: Everest · Charminar · side by side.

How they go on the roof

Purlins, laps and fixing: the numbers the shed-maker needs

A sheet is only as good as what it rests on. Maker is a published figure. Usual practice is common site practice that neither maker prints.

Two rows on the slope, side view
Two rows of 3.6 m sheets on a sloping roof, side viewSeven purlins about 1.07 m apart. The first row overhangs the eave by up to 0.3 m. The second row overlaps the first by 150 mm, and that lap sits on a purlin.Overhang at the eave0.3 m at mostEnd lap150 mm at least, on a purlinPurlins1.4 m apart at mostridgefirst row (bottom)second row (top)
Thickness drawn many times thicker than true. The end lap always sits on a purlin, never in the gap between two.
The sheet, cut across
Cross-section of the sheet profile and the side lapA corrugated sheet 1,050 mm wide with a wave every 146 mm and 48 mm deep. The next sheet overlaps its edge by about 44 mm, so each sheet covers about 1,010 mm.sheet width 1,050 mmcovers 1,010 mm of roofpitch 146 mm48 mmside lap 44 mmThickness 6 mm, drawn thicker than true.
Measurements: Charminar's page for width, pitch and depth; Everest's for cover and side lap.
  • MakerPurlins at most 1.4 m apartSo a 2 m sheet rests on 2 purlins, 2.5 m and 3 m on 3, and 3.6 m on 4. A 3 m sheet on only two purlins would hang over by more than the limit.
  • MakerAt most 0.3 m of sheet past the last purlinAt the eave and at the ridge. Longer than that and the sheet flaps in wind and cracks at the purlin.
  • MakerEnd lap 150 mm or more, on a purlinThe upper row goes over the lower row so water runs down and out. The lap must be on a purlin or the sheet breaks there.
  • MakerSide lap one wave, about 40 to 44 mmThe sheet is 1,050 mm wide and covers about 1,010 mm. In the count below we use 1,000 mm.
  • Usual practiceFix on the crest, with a washerJ-bolt or hook bolt through the top of a wave into the purlin, never in the valley where water runs. Ask us for the count for your layout and we will work it out.
  • Usual practiceSlope of about 1 in 4 to 1 in 3 (15–18°)Neither maker prints a minimum. A flatter roof leaks at the laps in driving rain.
  • Usual practiceStart away from the rain-driving windLay each row from the side the weather does not come from, so wind cannot get under an open edge.
  • Usual practiceNever stand between purlinsLay a plank across two purlins and kneel on that. A sheet that has been stepped on mid-span can look fine and leak for years.
How many sheets

Sheets for a shed or a roof

Put in the roof, and see every length side by side. The best row is the fewest metres of sheet. For a roof with two slopes, do one slope and double it. Full tool: roofing sheet calculator.

Measure the slope along the rafter, from the outer end of the sheet at the eave up to the ridge. Include the 1 ft or so that overhangs the wall.

Roof area: — sq ft

Your sheets

Sheet totalAsk rate
Send this list on WhatsApp

Counted with a 1.0 m cover and a 150 mm end lap. Leftover is the length cut off the top row; it often makes a sheet for the next job. Ridge caps and bolts: we work the count from your layout.

Asbestos

What each maker says, and how to check your sheet

Old corrugated cement sheets were made with asbestos fibre. Newer lines use other fibre. The makers are not equally clear about which is which.

1Everest

The standard sheet's page does not say. Its photo caption calls it "asbestos fibre cement". The Hi-Tech line is stated non-asbestos, made with PVA fibre.

2Charminar standard

BirlaNu's page does not state the fibre. It quotes IS 459:1992, which is the standard for corrugated asbestos-cement sheets, so quoting it does not tell you the sheet is asbestos-free.

3Charminar Fortune

Stated asbestos-free, quoting IS 14871 as well. BirlaNu lists white under this line, and not under its standard line. Our Charminar sheet is white.

Read the stamp or label on the bundle for the line name, and ask us on WhatsApp which line is on the sheets we hold. Whatever the line: cut with a hand saw or wet, wear a mask, no dry grinding, and do not break up an old roof for fun. Side by side: asbestos or asbestos-free.

Getting them home

Sheets crack in handling, not on the roof

Carry on edge

Two people, one at each end, sheet on its edge. Flat, a long sheet bends and cracks near the middle. Never drop it on a corner.

Stack flat, on level ground

On wood battens under every purlin position, not on bare earth. Keep stacks low and out of the sun until the roof is ready.

Count and look before the vehicle leaves

Count the sheets and check the corners and edges. Cutting and delivery are charged separately; ask for the amount for your site. Delivery and transport · loading.

Questions people ask us

Short answers

What is the price of a 10 feet cement sheet?

The price per sheet, by length and maker, is on our roofing sheet rates page for the day. Marketplace listings quote per metre, per square foot or per piece, so they cannot be compared. Ours is per sheet. A 10 ft sheet is 3 m long, 1.05 m wide and 6 mm thick.

Is 12 feet the same as 3.6 m?

Close. 3.6 m is 11.8 ft, and it is sold as "12 feet". In the same way 6, 8 and 10 ft are 2, 2.5 and 3 m (6.6, 8.2 and 9.8 ft). Measure the roof in metres or feet, but count in the real length.

How many cement sheets do I need for my shed?

Sheets across: roof length divided by 1.0 m, rounded up. Rows up the slope: take the slope length, subtract 150 mm, divide by the sheet length less 150 mm, round up. Or put the two sizes in the counter above, which shows all four lengths together.

How much does a cement roofing sheet weigh?

Charminar publishes 12.3 to 12.7 kg per metre of length, so a 10 ft (3 m) sheet is 37 to 38 kg and a 12 ft (3.6 m) sheet 44 to 46 kg. Everest does not publish its standard sheet's weight; its Hi-Tech page gives up to about 14 kg per metre. Plan for the heavier.

Are your sheets asbestos-free?

It depends on the line, and the makers are not equally clear. Everest names its Hi-Tech line non-asbestos; Charminar names its Fortune line asbestos-free. Read the stamp on the bundle and ask us on WhatsApp which line we hold; the section above sets out what each maker says.

Everest or Charminar: which is better?

Both are 6 mm and 1.05 m wide, and their coverage figures match. Everest publishes more installation figures; Charminar publishes the weight and wave. Choose by colour (grey or white) and by the day's price, and keep one maker on one roof.

How long does a cement sheet last?

Everest states a minimum durability of 40 years with proper handling and fixing; BirlaNu says "decades". In practice, fixing on the crest, laps on purlins and no walking between purlins decide how long the roof stays dry.

Do you deliver sheets, and what about cutting?

Yes. Cutting and delivery are charged separately from the sheet price; ask for the amount for your site. See delivery and transport. Count the sheets and check the corners before the vehicle leaves.

Can I get other lengths, other colours, ridge caps or bolts?

We can order them for you; ask on WhatsApp for the time it takes. J-bolts, hook bolts, washers and ridge caps come with the sheets for your roof.

Where can I buy cement sheets near me in Muzaffarpur?

At our store: 199 Patahi Rd (Reva Road), near Shiv Mandir, Bhagwanpur, Muzaffarpur 843113. Mon to Sat, 8 am to 6 pm. Call or WhatsApp 90310 74624.

Abhishek Ranjan
Diploma Civil Engineer, Tashya Ventures

Civil engineer at our Reva Road store, Muzaffarpur. Every number on this page was checked against the makers' own pages on 12 Nov 2026. Where a maker is silent, the page says so. Where they disagree, it gives the safer figure.

Where the numbers come from

  1. BirlaNu, Fiber Cement Roofs (Charminar): 1 to 4.25 m long, 1,050 mm wide, 6 mm, pitch 146 mm, depth 48 mm, about 12.3–12.7 kg per metre, 91% (3 m) and 87% (1.5 m) coverage, IS 459:1992, colours grey, blue, green, yellow, red.
  2. BirlaNu, Fortune Fiber Cement Roofs: stated asbestos-free, 1 to 3.6 m, IS 459 and IS 14871, colours include white.
  3. Everest Industries, Fibre cement roofing: 1.05 m wide, 1.01 m cover, 3 m sheet covers 2.88 m² (91%), purlins at most 1.4 m, overhang at most 0.3 m, end lap 150 mm, side lap 44 mm (caption 40 mm), "minimum durability 40 years".
  4. Everest Industries, Hi-Tech non-asbestos sheet: PVA fibre, 6 mm, 12.44 kg/m in the table and 13.5 kg/m² in its FAQ.
  5. IndiaMART, cement roofing sheets listings, read 12 Nov 2026, for what other sellers show (no weight, no laps, mixed units).

Send us your roof size

Length and slope in feet. We send back the sheets by length, with today's price, on WhatsApp.

TASHYABUILDING SOLUTIONS · MUZAFFARPUR
WhatsApp 90310 74624tashyaventures.com