हिंदी Call90310 74624
Home›Guides›Paint
Painting guide · costs

Painting cost per sq ft in Muzaffarpur: labour, material, and what changes the figure

The short answer

There is no single "rate per sq ft". When a painter quotes one, it is one of three figures, and they are far apart:

  1. MMaterial onlyPaint, primer and putty. You can work it out to the paisa from the tin's coverage and today's price.
  2. LLabour onlyThe painter's hands. You buy the material yourself.
  3. =With materialLabour plus material, bought by the painter or thekedar. The biggest of the three.

Before comparing two quotes, ask: which of the three is it, per sq ft of wall or of floor, and which coats are in it?

₹41
New inside wall, full puttyPer sq ft of wall, with material. CPWD Delhi rate.
₹19.6
Repaint, or no puttyPrimer and 2 coats of emulsion, with material. CPWD.
7–8 ml
Paint on 1 sq ftTwo coats inside. So material per sq ft is small and checkable.

CPWD figures: Delhi Schedule of Rates 2023, converted from per sq m. They are Delhi rates and subject to change; a Muzaffarpur painter's rate will differ. Use them to compare, not as a quote.

What goes on one square foot
One square foot of wall, layer by layer A one-foot square of new inside wall shown as stacked layers: cement plaster, primer 7 to 9 ml, putty in two coats 50 to 59 grams, primer 5 to 6 ml, and paint in two coats 7 to 8 ml. Add the painter's labour and you get the with-material rate. MATERIAL ON 1 SQ FT 1 SQ FT 1 ft (about 30 cm) Cement plaster Primer Putty, 2 coats Primer Paint, 2 coats mason's work 7–9 ml 50–59 g 5–6 ml 7–8 ml price per litre ÷sq ft per litre= material per sq ft + Painter's labour sanding, 6 coats, masking, cleaning up = The "with material" rate what a thekedar quotes per sq ft of wall
A new inside wall. Amounts from the makers' coverage figures: Style Color Smart 120–140 sq ft per litre for 2 coats (Birla Opus); WallCare putty 17–20 sq ft per kg (Birla White); ActivCoat primer 110–140 sq ft per litre on plaster, 170–200 on putty (Birla White), measured before water is added. Layers drawn far thicker than they are.
Three figures, one name

What each "rate per sq ft" includes, and how to check it

Most arguments over a painting bill start here: one side meant labour, the other meant labour with material.

MMaterial only

The paint, primer and putty that end up on the wall, divided by the area.

  • Paint: price of the tin ÷ the sq ft it covers. A 4 L tin of Style Color Smart covers 480–560 sq ft in two coats.
  • Putty and primer only where the job needs them. A repaint on a sound wall needs no full putty.
  • Outside walls take more than twice the paint per sq ft.
Check it: our calculator below lists the litres and kilos and prices them at today's rate.

LLabour only

What the painter charges for his work, when you buy the material.

  • Should name the coats: how many of putty, primer and paint.
  • Should say whether sanding, masking, shifting furniture and cleaning are in.
  • Some painters work by the day (dihadi) instead. Then ask how many sq ft a day, so you can turn it into a rate.
Check it: take a with-material rate and subtract the material. What is left is labour and margin.

=With material

Labour plus material, with the painter or thekedar buying the material. This is the figure CPWD publishes.

  • Ask the brand and the product name, not just "Birla Opus" or "emulsion". Products in one brand differ a lot in price.
  • Ask for the tins to be opened on site, so you can see what goes on.
  • The thekedar's margin on the material is part of this figure.
Check it: price the same material yourself. The gap is what you pay for labour and buying.

Labour plus material bought by you is not always cheaper than a with-material quote, but it is always clearer. Either way, get it in writing: rate, area basis, coats, and the product names. More on this in how to choose a painter.

The 3× trap

Per sq ft of wall, or per sq ft of floor?

A painter who says "₹ per sq ft" may mean the wall he paints or the floor of your flat. The same room has three times more wall than floor.

One room, opened flat
A 12 by 10 ft room unfolded The floor of a 12 by 10 ft room is 120 sq ft. Its four walls, 10 ft high, unfold around it. After a door and two windows, the walls to paint come to 387 sq ft, more than three times the floor. The ceiling is another 120 sq ft. FLOOR 120 sq ft door windowwindow 12 ft 10 ft 10 fthigh Ceiling same as floor 120 sq ft Floor (carpet area) 120 sq ft Walls to paint 387 sq ft = 3.2×
Wall area: 2 × (12 + 10) × 10 = 440 sq ft, less one door (3 × 7 ft) and two windows (4 × 4 ft each) = 387 sq ft.
₹19.6
Per sq ft of wallCPWD's with-material rate for primer and two coats of emulsion.
₹7,600
For this room's walls387 sq ft × ₹19.6. Ceiling not included.
₹63
The same job, per sq ft of floor₹7,600 ÷ 120 sq ft. Not dearer: just a different basis.
Rule of thumb: in rooms with 10 ft walls, the wall area is about three times the floor area; add the floor area again if the ceilings are painted too. For a quote, have the walls measured: length × height of each wall, less doors and windows.

Outside walls are measured the same way: the distance round the house × the height, for each storey, plus the parapet. A 30 × 40 ft house is 140 ft round; at 10 ft a storey plus a 3 ft parapet, one storey comes to about 1,800 sq ft before windows. House-by-house figures are in cost to paint a house by size.

With material, job by job

CPWD's published rate for each kind of painting job

The Central Public Works Department publishes what it pays contractors for each item of work, material and labour together. It is the most widely used public benchmark in India. We have added up its items for each job and turned square metres into square feet.

₹ per sq ft of wall, with material
CPWD rate per sq ft for six painting jobs, built up from its items Inside, new plaster with full putty: primer 6.87, putty 14.50, primer 6.87, emulsion two coats 12.77, total 41.0. Inside, new plaster without putty: 19.6. Inside repaint of a sound wall: 19.6 plus spot putty. Inside over old distemper: scraping 2.34 plus primer and two coats, 22.0. Outside, new plaster: 14.9 including primer. Outside repaint: primer 6.87 plus two coats 11.22, 18.1. ₹0₹10₹20₹30₹40 Inside, newInside, newInside repaintInside, oldOutside,Outside full puttyno puttysound walldistemper offnew plasterrepaint putty 14.50paint 12.77 with primer 41.019.619.6+22.014.918.1 Primer, 1 coat Putty Inside paint, 2 coats Outside paint Scraping Spot putty, extra
CPWD Delhi Schedule of Rates 2023, Vol. 2, items 13.80, 13.82.2, 13.85.3, 13.91, 13.46.1 and 13.111.1, ÷ 10.76 sq ft per sq m. Delhi rates, subject to change.
JobCPWD, with materialMaterial at our priceLeft for labour and margin
Inside, new plaster, full puttyPrimer, putty, primer, 2 coats₹41.0Ask rateAsk rate
Inside, new plaster, no puttyPrimer, 2 coats₹19.6Ask rateAsk rate
Inside repaint, sound wallSand, spot putty, primer, 2 coats₹19.6Ask rateAsk rate
Inside, over old distemperScrape off, primer, 2 coats₹22.0Ask rateAsk rate
Outside, new plasterFill holes, primer, 2 coats₹14.9Ask rateAsk rate
Outside repaintWash, primer, 2 coats₹18.1Ask rateAsk rate

Material at our price: Birla Opus Style range with Birla White putty and primer, at today's rate from paint rates, for the makers' low and high coverage. Premium paint adds about ₹0.50 per sq ft to CPWD's inside rate (item 13.83.2) and ₹1 outside (13.47.1).

How to read these numbers CPWD's rate is what a government contractor in Delhi is paid: the material, the painter, tools and the contractor's margin, for work checked by an engineer. Muzaffarpur labour is not Delhi labour, so a local painter can fairly quote below it. A quote far below CPWD for a new wall with full putty usually means a coat is missing, or the putty or primer is not in the price. Ask before you agree.
What changes the figure

Why your house costs more or less per sq ft than the next one

Two houses on the same lane can get rates far apart, and both can be fair. These are the reasons, marked on a typical G+1 house.

A G+1 house, outside and in
What raises the painting rate on a G+1 house A two-storey house with a parapet, a stair room on the roof, sunshades over the windows and bamboo scaffolding on one side. Numbered marks: 1 outside walls, 2 parapet and sunshades, 3 scaffolding, 4 the tall stair-room walls, 5 damp at the plinth, 6 the inside rooms. bamboo 1 2 3 4 5 6
Mark 6 looks through the window at an inside wall: plaster, putty, paint.
1

Outside walls

More paint

Birla Opus exterior paints cover 50–60 sq ft per litre for two coats; inside paints 120–160. So outside material per sq ft is more than double, even at a similar price per litre.

2

Parapet tops and chhajjas

One extra coat

The Opus exterior sheets ask for one more coat on parapet tops and sunshades, where rain sits. Many small edges also slow the painter down.

3

Scaffolding above the ground floor

LabourUsual practice

For G+1 and above, painters tie bamboo scaffolding. Usually it is the painter's own and inside his rate; some charge it apart. Ask which, before work starts.

4

Tall walls: stairs, mumty, high ceilings

LabourUsual practice

A double-height stair wall needs ladders or a platform, and goes slower. Painters often quote it higher than a normal room wall.

5

Damp at the plinth or behind a bathroom

Fix first

No paint stops water. Fix the cause, let the wall dry, then use waterproof putty there. Painting over it wastes the whole cost. See seelan, foundation to roof.

6

Inside: new or repaint, putty or not

Putty +₹21Repaint −

Full putty plus the primer over it adds about ₹21 per sq ft at CPWD's rates. A sound wall being repainted needs only spot putty. Which walls need putty: putty or no putty.

+

The paint range

Per sq ft, not per litre

Better paint costs more per litre but often covers more: Style Color Smart 120–140, Calista Ever Wash Shine 130–150, One Pure Elegance 140–160 sq ft per litre for two coats. Compare cost per sq ft, not price per tin.

+

Old distemper, deep shades, season

Labour

Old distemper must be scraped off before emulsion (CPWD adds ₹2.34 per sq ft). Deep shades may need the third coat the Opus sheets allow. Painters are busiest before Diwali and Chhath.

Check your quote

Material, labour and the total for your walls

Pick the job, the paint and the area. You get the material at the makers' coverage and today's price, CPWD's rate for the same job, and, if you type your painter's rate, what it really covers.

Floor area is turned into wall area at 3 × (10 ft walls); with ceilings, 4 ×. Measure the walls for a firm figure.

Area to paint: — sq ft of wall

Your figures

MaterialAsk rate
Material per sq ftAsk rate
CPWD rate, with material—
LabourAsk rate
Total, labour + materialAsk rate
Type your painter's rate to see what it covers.
Send this list on WhatsApp

Quantities are a low and a high figure from the makers' coverage; the packs are for the high figure. Material prices fill in from today's paint rates. CPWD: Delhi Schedule of Rates 2023, subject to change. Room by room: paint calculator.

Before you say yes

Six things a painting quote should say

  1. Labour only, or with materialWritten in words, next to the rate.
  2. Wall area or floor areaAnd whether ceilings, the staircase and the outside are in the area or priced apart.
  3. The coatsHow many of primer, putty and paint. "Two coats of paint" with no primer or putty named means they are not in it.
  4. The product namesFor example Style Color Smart or Calista Ever Wash Shine, not "Birla Opus emulsion".
  5. Scaffolding, scraping and repairsBamboo scaffolding, scraping old distemper, filling cracks: in the rate, or extra?
  6. Who measures, and whenAgree to measure the walls together after the work, with doors and windows taken off. More in how to choose a painter.
Questions people ask us

Short answers

What is the painting rate per sq ft with material?

It depends on the job. CPWD's Delhi rates, material and labour together, work out to about ₹19.6 per sq ft of wall for primer and two coats of emulsion, and about ₹41 for a new wall with full putty. These are Delhi rates and subject to change. The material part at today's Muzaffarpur price is in the calculator above.

What is the painting labour per sq ft? (prati sq ft mazdoori kitni hai)

CPWD publishes no labour-only rate for painting; its rates include the material. Labour is whatever your painter charges per sq ft of wall for an agreed list of coats. To check it, take a with-material rate, subtract the material (the calculator prices it), and what is left is labour and margin.

Is the rate per sq ft of floor or of wall?

Ask, every time. A 12 × 10 ft room with 10 ft walls has 120 sq ft of floor and about 387 sq ft of wall after a door and two windows. A rate on floor area is about three times a rate on wall area for the same work.

Does the painter's rate include putty?

Often not. Full putty also needs a second primer coat over it. At CPWD's Delhi 2023 rates the putty and the extra primer add about ₹21 per sq ft, material and labour together. Get putty written as its own line. Whether your walls need it: putty or no putty.

Why does outside painting need so much more material?

Outside paint goes on thicker, over rough plaster. Birla Opus gives 50–60 sq ft per litre for two coats of its exterior paints, against 120–160 inside, so each sq ft takes more than twice the paint.

Is a quote much below CPWD a bad sign?

Not by itself: CPWD's rate is built on Delhi costs and includes a contractor's margin. But on a new wall with full putty, a rate far below it usually means a coat is missing or the material is a cheaper product. Check the coats and the product names in the quote.

When is the best time to paint?

The dry months after the monsoon. Birla Opus asks for no outside painting if rain is likely within 4 days, or below 10°C or above 40°C, and no inside painting above 90% humidity. Painters are busiest in the weeks before Diwali and Chhath, so book early or after.

Arun Tiwari
Thekedar · site work and costs, Tashya Ventures

Arun Tiwari runs site work and estimates at our Reva Road store in Muzaffarpur. The CPWD rates on this page were added up from the 2023 schedule, and the coverage figures checked against the makers' own sheets, on 12 Nov 2026. Where a figure is usual local practice rather than a published one, the page says so.

Where the numbers come from

  1. CPWD, Delhi Schedule of Rates 2023, Vol. 2, sub-head 13 (Finishing), per sq m: 13.80 white cement putty 1 mm ₹156.05; 13.82.2 acrylic emulsion, two coats ₹137.45; 13.83.2 premium interior emulsion, two coats ₹142.80; 13.85.3 cement primer on wall ₹73.95; 13.91 removing distemper ₹25.15; 13.46.1 acrylic smooth exterior paint, new work with primer ₹160.60; 13.47.1 premium exterior with silicone ₹171.10; 13.111.1 acrylic smooth exterior, old work two coats ₹120.75. Converted at 10.764 sq ft per sq m. Delhi rates, subject to change.
  2. Birla Opus, Style Color Smart, Calista Ever Wash Shine and One Pure Elegance sheets: 120–140, 130–150 and 140–160 sq ft per litre for two coats; 90% humidity limit.
  3. Birla Opus, Style Power Bright, Calista Neo Star and One True Life sheets: 50–60 sq ft per litre for two coats, 2–3 coats, one extra coat on parapets and chhajjas, 10–40°C, no rain within 4 days.
  4. Birla Opus, Style Perfect Start and Calista Perfect Choice primer sheets: 80–100 sq ft per litre.
  5. Birla White, Wall putty work: step-by-step process: 17–20 sq ft per kg for two coats.
  6. Birla White, ActivCoat Interior primer: 110–140 sq ft per litre per coat on plaster, 170–200 on putty or old paint.
  7. Birla Opus, Opus Assurance: 1-year repaint cover, at least 2,000 sq ft, registered contractor.

Send us your painter's quote

We'll price the material in it at today's rate and tell you what is left for labour, on WhatsApp.

TASHYABUILDING SOLUTIONS · MUZAFFARPUR
WhatsApp 90310 74624tashyaventures.com