हिंदी Call90310 74624
Home›Guides›Steel
Steel guide · sariya

Sariya weight chart: 6, 8, 10, 12 and 16 mm, per metre and per 12 m bar

The short answer
kg per metre = D² ÷ 162D = bar size in mm
SizePer metrePer 12 m bar
6 mm0.222 kg2.66 kg
8 mm0.395 kg4.74 kg
10 mm0.617 kg7.40 kg
12 mm0.888 kg10.66 kg
16 mm1.58 kg18.96 kg

Standard weight per metre from IS 1786, the Indian standard for TMT bars. It is the same for every brand and grade. Price of one bar = rate per kg × weight of the bar.

Twice as thick, four times the weight
Weight of a 12 m bar by size Bars drawn to weight: 6 mm 2.66 kg, 8 mm 4.74 kg, 10 mm 7.40 kg, 12 mm 10.66 kg, 16 mm 18.96 kg per 12 m bar. Under each, the bar's cut end at true relative size. The 16 mm bar is twice as thick as the 8 mm bar but four times as heavy. 10 kg20 kg 2.664.747.4010.6618.96 kg per 12 m bar 6 mm8 mm10 mm12 mm16 mm 8 mm → 16 mm 2 × the size = 4 × the weight 4.74 kg × 4 = 18.96 kg
Bar heights are to weight; the cut ends below are to true relative size (dotted ring = ribs). Weight goes with the square of the size, so a bar just 1 mm thin is much lighter than it looks. Figures: IS 1786:2008, Table 1.
Full chart

Standard weight of every size, in the units people actually ask in

Metres for the drawing, feet for the mason, 12 m bars for the counter, quintals for the bill. All from the same standard weight per metre.

Sizekg per metrekg per footkg per 12 m barBars in 1 quintal
6 mmRings, chhajja, small lintels0.2220.0682.6637.5
8 mmRings and stirrups, slab cross bars0.3950.1204.7421.1
10 mmSlab bars, lintels0.6170.1887.4013.5
12 mmSlab, beam and column of a small house0.8880.27110.669.4
16 mmColumns, footings, main beams1.580.48218.965.3
20 mmHeavy columns and footings · we order it2.470.75329.643.4
25 mmHeavy columns and footings · we order it3.851.17346.202.2
Where the numbers come fromPer-metre figures are IS 1786:2008, Table 1. The rest is arithmetic: 1 foot = 0.3048 m, a full bar is 12 m (about 39 ft 4 in), a quintal is 100 kg. For a tonne, multiply the last column by ten.
Which size goes whereThe jobs shown are the usual ones in a house (JSW's home guide gives the same split). Your engineer's drawing decides. To turn a drawing into kg and bars, use the sariya calculator.
Ordering in soot?Many masons still say "4 soot" or "5 soot". Say mm on the bill so there is no mix-up. Our soot to mm guide explains the old sizes.
The formula, explained

Where D² ÷ 162 comes from

Most charts print the formula and stop. It is only the size of the bar and the weight of steel, put together. Once you see that, you see why weighing is the honest test.

One metre of bar A one-metre piece of bar with its round cut end of size D. Area of the cut end is pi times D squared over 4. Area times one metre times 7,850 kg per cubic metre gives D squared times 0.006165 kg, which is D squared divided by 162. D 1 metre = 1,000 mm Cut end: area = π × D² ÷ 4 area × 1 m × 7,850 kg per m³ (steel) = D² × 0.006165 kg per metre = D² ÷ 162.2 rounded: kg per metre = D² ÷ 162

1The cut end

A bar's cut end is a circle. Its area is π × D² ÷ 4. For 12 mm that is 113 sq mm, the figure IS 1786 prints for 12 mm.

2Times the weight of steel

IS 1786 tells testers to take steel as 0.00785 kg per sq mm of section per metre (7,850 kg per cubic metre). One metre of 12 mm bar: 113 × 0.00785 = 0.888 kg.

3Fold the constants together

π ÷ 4 × 0.00785 = 0.006165, and 1 ÷ 0.006165 = 162.2. Rounded to 162, the formula is easy to do in your head and is off by less than a gram per metre.

What this means for you: nothing in the formula is about brand, grade or price. Only D. A bar that is thinner than its label cannot weigh the same, so a scale tells you more than a ruler. For any length, multiply: weight = D² ÷ 162 × metres. An 8 mm ring cut 1.1 m long: 64 ÷ 162 × 1.1 = 0.43 kg.

Rate per kg, per quintal, per piece

Turn any sariya rate into the price of one bar

One shop says per kg, another per quintal, a third per piece. The bar weight joins them, and lets you see which quote is really cheaper.

From rate to price of one bar Rate per quintal divided by 100 gives rate per kg. Rate per kg times the weight of one bar gives the price of one 12 m bar. Going back, price of one bar divided by its weight gives the real rate per kg. Rate per quintal Rate per kg Price of one 12 m bar ÷ 100 × bar weight 12 mm: × 10.66 kg ÷ barweight Going back up: price of one bar ÷ its weight = the real rate per kg. Use it to compare two shops.
Every ₹1 more per kg adds, per 12 m bar₹
6 mm2.66
8 mm4.74
10 mm7.40
12 mm10.66
16 mm18.96

1 · Your rate


2 · Check a per-piece quote

Today's rate for Tata Tiscon and Saluja Gold is on the sariya rate page. Cutting and delivery are charged separately; ask for the amount for your site.

Price of one 12 m bar

6 mm 2.66 kgAsk rate
8 mm 4.74 kgAsk rate
10 mm 7.40 kgAsk rate
12 mm 10.66 kgAsk rate
16 mm 18.96 kgAsk rate
Put a per-piece quote in box 2 to see its real rate per kg and per quintal.
Ask our rate per kg and per piece

Uses the standard weight per metre. A real bar can be a little lighter or heavier (see below), so a per-piece price and a per-kg price can differ by a few rupees. Full comparison: per kg, per piece, per quintal.

Why a real bar weighs a little more or less

How much lighter or heavier IS 1786 allows

No rolling mill makes a bar to the gram. The standard sets a limit for each size: thin bars get more room, because a small slip in rolling is a bigger share of a thin bar.

Allowed weight difference by size On a scale from minus 10 to plus 10 percent: 6, 8 and 10 mm bars weighed together may be 7 percent off either way, one bar alone no more than 8 percent light. 12 and 16 mm: 5 percent, one bar 6 percent light. 20 and 25 mm: 3 percent, one bar 4 percent light. A 10 mm bar sold as 12 mm is 31 percent light, far off the scale. standard weight 6, 8, 10 mm ±7% one bar alone: not below −8% 12, 16 mm ±5% one bar alone: not below −6% 20, 25 mm ±3% −10%−5%0+5%+10% −31% a 10 mm bar sold as 12 mm
Yellow band: several bars weighed together. Red line: the lowest one bar on its own may go; the standard sets no upper limit for one bar. IS 1786:2008, Table 2.
SizeStandard 12 m barSeveral bars, each on averageOne bar, lowest
6 mm2.66 kg2.48 – 2.852.45
8 mm4.74 kg4.41 – 5.074.36
10 mm7.40 kg6.89 – 7.926.81
12 mm10.66 kg10.12 – 11.1910.02
16 mm18.96 kg18.01 – 19.9117.82

Limits in kg worked out from IS 1786:2008, Table 2, for a full 12 m bar. If bars are cut to a length you asked for, the standard also lets each piece be up to 75 mm longer or 25 mm shorter (clause 7.1), so measure the length when you weigh.

Inside the band

A few percent either way

Normal. If you pay per kg, you pay for exactly the steel you get. Nothing to worry about.

Per piece, light bars

Where a light bar costs you

If a shop prices per piece, a bar at the bottom of the band gives you less steel for the same money. Divide the piece price by the real weight to see the true rate per kg.

Far outside

About 30% light is not a tolerance

It is usually the next size down sold under the bigger number: 10 mm as 12 mm, 8 mm as 10 mm. Your slab gets far less steel than the engineer drew. See weighing sariya to spot a fake.

Check a delivery

Weigh a few bars, and know in a minute

A ruler or caliper won't do it: the ribs make every TMT bar measure wider than it is. IS 1786 itself works out a bar's real section from its weight and length. Do the same.

Weighing five bars together Five 12 mm bars lying across a platform scale that reads 52.4 kg. Standard for five bars is 53.3 kg, so they are 1.7 percent light, inside the 5 percent limit. 52.4 kg 5 bars from different parts of the bundle Standard: 5 × 10.66 = 53.3 kg 52.4 kg is 1.7% light · limit ±5% · OK
  1. Pick 4 or 5 bars of one sizeFrom different parts of the bundle, not all from the top.
  2. Weigh them togetherAny shop scale that takes 60 kg. Note the reading.
  3. Measure the lengthA full bar should be about 12 m. If they were cut, use the real length.
  4. Put the numbers in the checkerIt compares them with the chart and the IS 1786 limit, and tells you what size the bars really weigh like.

Bar weight checker

Weighing one bar alone? Put 1. The limit for one bar is a little wider on the light side.

Result

Standard weight for these bars—
Your bars, per metre—
Difference—
Weighs like a bar of—
Put in the weight from the scale.
Send us the reading

At our Reva Road store we weigh bars on request, including bars bought elsewhere. Ask at the counter before loading.

Questions people ask us

Short answers

What is the weight of 12 mm sariya per metre?

0.888 kg per metre, the standard figure in IS 1786. A full 12 m bar weighs 10.66 kg. The formula 12 × 12 ÷ 162 gives 0.889 kg, the same thing to within a gram per metre.

What is the weight of 8 mm and 10 mm sariya?

8 mm: 0.395 kg per metre, 4.74 kg per 12 m bar. 10 mm: 0.617 kg per metre, 7.40 kg per 12 m bar. Both are IS 1786 standard figures.

How many bars make one quintal? (sariya kitne piece ka quintal)

With 12 m bars: about 37.5 of 6 mm, 21 of 8 mm, 13.5 of 10 mm, 9.4 of 12 mm and 5.3 of 16 mm. For a tonne, multiply by ten.

Does the grade or the brand change the weight?

No. IS 1786 gives one standard weight per size for every grade, from Fe 415 to Fe 600. A 12 mm Tata Tiscon 550SD bar and a 12 mm Saluja Gold bar have the same standard weight, 0.888 kg per metre. Grade is about strength, not weight.

Why does my bar weigh less than the chart?

A little is allowed: bars weighed together may be up to 7% off for 6 to 10 mm, 5% for 12 and 16 mm and 3% above 16 mm, and one bar alone up to 8%, 6% or 4% light (IS 1786, Table 2). A bar about 30% light is usually the next size down sold under the bigger number. Use the checker above.

Can I check the size with a ruler or caliper instead?

Not reliably. The ribs make a TMT bar measure wider than its real size, so a "12 mm" reading can hide a thinner bar. IS 1786 itself works out a bar's section from its weight and length. Weigh it.

How many bars are there in a bundle?

It depends on the maker, and sources online disagree. We sell by weight, so the bundle count is for planning, not for the bill. See how many bars in a bundle.

Will you weigh my sariya?

Yes. Ask at the counter and we weigh bars on our scale, including bars bought elsewhere. Cutting and delivery are charged separately from the material price; ask for the amount for your site.

Abhishek Ranjan
Diploma Civil Engineer, Tashya Ventures

Answers cement, steel and structure questions at our Reva Road store, Muzaffarpur. Every weight on this page was checked against IS 1786:2008 on 12 Nov 2026. Where the formula and the standard differ in the last digit, the page prints the standard's figure.

Where the numbers come from

  1. Bureau of Indian Standards, IS 1786:2008, High strength deformed steel bars and wires for concrete reinforcement: Table 1 (nominal area and mass per metre), Table 2 (tolerance on nominal mass), clause 7.1 (cut lengths +75/−25 mm), clause 7.2.1 (steel taken as 0.00785 kg per sq mm per metre), clause 6.3.1 (area from weight and length).
  2. JSW Neosteel, TMT Bar Weight Chart (prints 16 mm as 1.578 kg/m; IS 1786 says 1.58) and How much steel is required for a house (8 mm for stirrups, 10 and 12 mm for slabs, 16 mm and up for columns, beams and footings).
  3. Jindal Panther, TMT steel bar weight chart: same 8 to 16 mm figures and D²/162; no tolerance figures.
  4. Tata Steel, Tata Tiscon 550SD page: grade and strength; it gives no weight table, which is why this page exists.

Send us your bar list

Sizes and number of pieces, or the kg from your engineer. We'll send back the weight and today's price, per kg and per piece, on WhatsApp.

TASHYABUILDING SOLUTIONS · MUZAFFARPUR
WhatsApp 90310 74624tashyaventures.com