हिंदी Call90310 74624
Home›Steel›Saluja Gold
TMT sariya · we stock it

Saluja Gold TMT sariya in Muzaffarpur: the value bar, sizes 6 to 16 mm, today's rate

The short answer

Saluja Gold is a BIS-licensed TMT bar made at Giridih, Jharkhand, and it is the lower-priced bar in our yard. We stock 6, 8, 10, 12 and 16 mm in Fe 500. It is not a weak bar. It is a plain-grade bar, so it fits plain jobs.

Saluja GoldBoundary wall, gate pillar, shed, tank base, a single-storey house that will stay single-storey.
Tata / D gradeEngineer-designed frame, G+1 and up, or a floor you may add later. See the Tata Tiscon comparison.

If your drawing names a grade, buy that grade and have it written on the bill.

520 MPa
Yield, Fe 500Maker's sheet. IS 1786 asks for 500.
15%
Stretch before breakingMaker's sheet. IS 1786 asks for 12.
CM/L-5801867
BIS licencePrinted on the maker's leaflet. Read it on your bundle tag.
Today's 12 mm rate: Ask rate per kg sariya rates
The bar and its tag
Close-up of a Saluja Gold bar and its bundle tag, with the marks to look for A ribbed bar with SALUJA GOLD, the grade code, an ISI mark and licence digits rolled along its length, three numbered callouts, and below it a bundle tag showing IS 1786, licence CM/L-5801867, size and grade. What to look for on the bar SALUJA GOLD SG600 581867 123 1 Brand and gradeRaised on the steel, repeated along the bar. 2 ISI mark and licence digitsISI mark and licence number, here ending 581867. 3 Double-grip ribsEven ribs on both faces; no cracks or flaking rust. After the bar photo in the maker's leaflet (SG600). What to look for on the bundle tag SALUJA GOLD TMT BARS StandardIS 1786 BIS licenceCM/L-5801867 Sizeas you ordered Gradeas on your bill Match four things to your bill Brand, grade, size, and the number of pieces.
Marks as shown in Saluja's own leaflet. Bars of other grades carry the same brand and ISI marks with their own grade; read what is on yours.
In our yard

Five sizes in stock, sold by weight

Saluja Gold is priced by weight, not by the piece. The sheet below shows what each size should weigh, so you can work out a quantity from your bar list.

Cross-sections of the five sizes we stock, drawn to scaleCircles drawn to scale for 6, 8, 10, 12 and 16 mm bars with standard weight per metre and per 12 m piece, and the usual job of each size. Our five sizes, drawn to scale Standard weight = d² ÷ 162 per metre. 6 mm0.222 kg/m2.66 kg / 12 m8 mm0.395 kg/m4.74 kg / 12 m10 mm0.617 kg/m7.40 kg / 12 m12 mm0.889 kg/m10.66 kg / 12 m16 mm1.580 kg/m18.96 kg / 12 m Rings, light work6, 8 mm Slabs and beams10, 12 mm Columns, footings12, 16 mm
Usual practice, not a rule. Your engineer's drawing decides the size for each member.
SizeStandard, per metreOne 12 m piece: standardSheet allowsPieces in bundle
6 mm0.222 kg2.66 kgnot in the sheetnot in the sheet
8 mm0.395 kg4.74 kg4.40–4.92 kg12
10 mm0.617 kg7.40 kg6.89–7.62 kg8
12 mm0.889 kg10.66 kg10.13–10.86 kg5
16 mm1.580 kg18.96 kg18.01–19.32 kg3

Standard weight is d² ÷ 162 per metre. "Sheet allows" is the range the maker's leaflet prints for a 12 m piece. The leaflet's tables start at 8 mm. More: sariya weight per metre.

Today's rate, Muzaffarpur

SizePer kgPer quintal12 m piece
6 mmAsk rateAsk rateAsk rate
8 mmAsk rateAsk rateAsk rate
10 mmAsk rateAsk rateAsk rate
12 mmAsk rateAsk rateAsk rate
16 mmAsk rateAsk rateAsk rate
Rate updated —. A quintal is 100 kg, so the per-quintal rate is the per-kg rate × 100.

Cutting and delivery are charged separately; ask for the amount for your site (delivery). The maker's own Bihar price list is a picture on its site; the rate here is ours, in text, with a date.

Work out your quantity

From a bar listkgNumber of pieces × the 12 m weight in the table above. The sariya calculator does it by stage: neev, column, lintel, chhat.
No bar list yet3.5–4 kg/sq ftA rough thumb rule for built-up area. Your engineer's schedule gives the real figure. See how much sariya for a chhat.
WhatsApp your list

Send the sizes and pieces; we reply with today's price.

The maker's own sheet

What Saluja's leaflet actually promises for Fe 500

Every figure here is from Saluja Steel & Power's own comparison leaflet (Nov 2024), set against the IS 1786 column printed beside it. Our stock is Fe 500, as on our supplier's bills.

How far the maker's Fe 500 figures sit above the IS 1786 floorYield strength 4 percent above the IS minimum, tensile strength 12 percent, tensile-to-yield ratio 8 percent, elongation 3 points above, carbon 7 percent below the limit, sulphur plus phosphorus exactly at the limit. Saluja Gold Fe 500 against IS 1786 IS 1786 limit Yield strength520 vs 500 MPa min+4%Tensile strength610 vs 545 MPa min+12%Tensile ÷ yield1.17 vs 1.08 min+8%Elongation15% vs 12% min+3 ptsCarbon0.28% vs 0.30% max−7%Sulphur + phosphorus0.105% vs 0.105% maxat the limit
Bars show how far past the IS 1786 limit each figure sits. Red means exactly at the limit.

1Strength has room to spare

Yield 520 against 500 MPa, tensile 610 against 545, stretch 15% against 12%. This is the sound part of the case for the bar: it clears the standard comfortably on strength.

2Chemistry only meets the limit

Sulphur and phosphorus are printed at the IS limit (0.055% each, 0.105% together), not below it. Carbon is a little under. A tighter chemistry is what a D grade adds, which is why we say plain bar for plain jobs.

3Fe 500 is not a D grade

The sheet prints no stretch-at-peak-load figure for Fe 500, and that figure is what a D grade is tested on. Muzaffarpur is in earthquake zone IV (IS 1893). For a framed house, engineers usually ask for a D grade. Fe 500, 500D and 550D explained.

Weight: the leaflet lets a 12 mm bar run 5% light and 2% heavy, and 8 and 10 mm bars 7% light. That is why the table above gives a range, not one number. Bend test for Fe 500 up to 20 mm: 4 times the bar diameter.

How we advise at the counter

When the cheaper bar is the sensible choice

The question is not "is Saluja good". It is "how hard will this building be tested, and will it grow?"

Saluja Gold is sensible

Boundary wall, gate pillar

Light loads and a simple frame. A licensed value bar does the job; Tata would buy you little here.

Saluja Gold is sensible

Single-storey house, staying single

Fine with a certified bar laid to a sound plan: closed rings with 135° hooks, cover blocks, proper lap. Be honest about "staying single".

Pay for Tata or a D grade

Ground floor now, floor later

Columns poured today must carry the floor you add in five years. Steel inside cast concrete cannot be changed, so decide before dhalai.

Pay for Tata or a D grade

Designed frame, G+1 and up

Columns and beams carry everything and the drawing may call for earthquake detailing. Buy exactly the grade on the drawing.

Shed, tank base, water-tank slab: Saluja Gold works. Two rules beat any brand choice: if the drawing names a grade, buy exactly that and ask for it on the bill; and never mix brands or grades inside one column, beam or slab. Saluja for the boundary wall and Tata for the house frame is fine. Side-by-side figures and the rupee gap: Tata Tiscon vs Saluja Gold.

When the truck comes

Count the pieces, weigh one, read the tag

Because Saluja is sold by weight, a full-weight bar and a full count are what you are paying for.

Pieces in one bundle, by sizeBundles hold 12 pieces of 8 mm, 8 of 10 mm, 5 of 12 mm and 3 of 16 mm. Count the pieces in a bundle Cross-section of one bundle, per the maker's leaflet. 8 mm10 mm12 mm16 mm 12 pieces8 pieces5 pieces3 pieces A bundle short by one piece is a short delivery.
Piece counts are from Saluja's leaflet for 8 to 16 mm. A bundle's weight is pieces × the piece weight in the table above.

On the bar

  • "SALUJA GOLD" and the grade rolled along the steel, not a sticker
  • The ISI mark with the licence digits
  • Even ribs, a straight bar, no cracks or flaking rust

On the bundle tag

  • IS 1786 and licence CM/L-5801867
  • The size and grade you ordered
  • The same brand, grade and size on your bill

Weigh one 12 m piece per size against the "sheet allows" column above. Not sure what you are looking at? Send a photo of the bar's stamp and the bundle tag on WhatsApp and we will tell you what it says. More checks: real or fake Saluja Gold.

Other grades

If your drawing says Fe 500D, 550 or 600

Saluja rolls Fe 500, Fe 500D, Fe 550, Fe 550D and Fe 600 (sold as SG600) in 5.5/6 to 32 mm. We keep Fe 500 in 6, 8, 10, 12 and 16 mm. Other grades and 20 to 32 mm we order on request; ask on WhatsApp for the time it takes.

Ordering Fe 500D?Ask for the mill test certificate with the delivery. Saluja's leaflet prints no Fe 500D mechanical figures (its tables are labelled inconsistently), so the certificate is your proof.
Not sure which grade?Send the structural drawing's notes on WhatsApp. We read the grade off it and tell you what we can supply.
Want a Tata alternative?Tata Tiscon 550SD is in stock in the same five sizes. See it.
Questions people ask us

Short answers

Saluja Gold sariya kaisa hai? (Is Saluja Gold sariya good?)

It is a BIS-licensed TMT bar to IS 1786 (licence CM/L-5801867 on the maker's leaflet), made at Giridih, Jharkhand, from the company's own sponge iron and billets. For Fe 500, the grade we stock, the maker publishes a minimum yield of 520 MPa and 15% elongation, above the IS minimums of 500 and 12. It suits boundary walls, sheds and single-storey houses that will stay single-storey. For a designed frame or upper floors, ask for a D grade or Tata Tiscon.

Saluja Gold ka rate kya hai?

The rate changes through the week. Today's Muzaffarpur rate per kg, per quintal and per 12 m piece is on our sariya rate page, with the time it was updated. Cutting and delivery are charged separately; ask for the amount for your site.

Can I build a two-floor house with Saluja Gold?

Ask your engineer and buy the grade on the drawing. Our stock is Fe 500. If the drawing asks for Fe 500D or 550D, we can order Saluja's D grades, or you can take Tata Tiscon 550SD from stock. For G+1 and up in Muzaffarpur, we advise a D grade.

How do I know the bar is genuine?

Look for "SALUJA GOLD" and the grade rolled along the bar, the ISI mark with the licence digits, and a bundle tag showing IS 1786 and CM/L-5801867. Match brand, grade and size to your bill and weigh one piece. Our guide: real or fake Saluja Gold. You can also send a photo of the stamp and tag on WhatsApp.

What is the difference between Saluja Gold and Tata Tiscon?

Mostly grade and price. Saluja Fe 500 is a plain grade; Tata Tiscon 550SD is a super-ductile grade with tighter chemistry. Both sheets are set side by side, with the rupee gap on a house, in Tata Tiscon vs Saluja Gold.

Do you have Saluja Gold Fe 500D?

Our stock is Fe 500, as on our supplier's bills. Saluja makes Fe 500D; we order it on request. Ask for the mill test certificate when it arrives, because the maker's leaflet prints no Fe 500D mechanical figures.

Does Saluja Gold publish a Bihar price?

Yes, as a picture on its price-list page, which search engines cannot read. Our rate page puts the Muzaffarpur rate in plain text, with a date.

Abhishek Ranjan
Diploma Civil Engineer, Tashya Ventures

Handles cement and steel at our Reva Road store, Muzaffarpur, where Saluja Gold is sold. Every figure on this page comes from the maker's own leaflet. Where the leaflet is unclear, this page says so.

Where the numbers come from

  1. Saluja Steel & Power, Saluja Gold comparison chart leaflet (Nov 2024): chemical and mechanical tables for Fe 500, 550, 500D/550D and 600 against IS 1786; bend and rebend; weight per metre and per 12 m piece with tolerances; pieces per bundle; IS 1786 licence CM/L-5801867; works at Mahtodih, Tundi Road, Giridih; sponge iron plant, steel melt shop and rolling mill; brand launched 2014.
  2. Saluja Steel & Power, salujagold.com: grades Fe 500, Fe 550, Fe 500D and Fe 600; sizes 5.5/6 to 32 mm. Price list page: state-wise lists as pictures; GST to be confirmed at quotation.
  3. Grade of our Saluja Gold stock: Birla Pivot purchase bills, Oct 2026 (Fe 500).
  4. IS 1786 minimums: the IS columns printed in the leaflet. Standard weight per metre d² ÷ 162. Earthquake zone IV: IS 1893. Steel per sq ft: the thumb rule used in our sariya calculator.

Need Saluja Gold for your site?

Send the sizes and quantity, or your bar list, on WhatsApp. We reply with today's price and what is in stock.

TASHYABUILDING SOLUTIONS · MUZAFFARPUR
WhatsApp 90310 74624tashyaventures.com