Wall tile 393 LT, 300×450: the light tile with a faint wave, series 393
393 LT is the light field tile of series 393: a 300 × 450 mm ceramic wall tile with a faint wave in it. The wave is quiet, so the wall does not look flat, but it is still a background. Around it sit 393 DK, the dolphin highlighter 393 HL-1 and the matt floor 393 floor matt.
A faint wave behind a bathroom set
The wave is the only thing that sets 393 LT apart from a plain tile. It gives the wall a soft movement, like water, which suits a bathroom. It is faint enough that you can run it across a whole wall without tiring of it.
सादी टाइल से 393 LT को अलग सिर्फ़ लहर करती है। यह दीवार को पानी जैसी नरम हलचल देती है, जो बाथरूम को जँचती है। इतनी हल्की है कि पूरी दीवार पर बिना ऊबे चल जाती है।
Which rooms to use it in, and which not
A wall tile does one job in a set. Pick the job.
Bathroom wall
Best fit
- A calm wall with soft movement; goes with the matt floor in the same set.
- See bathroom wall tiles.
Kitchen wall
Good fit
- A light kitchen wall with a faint wave behind the counter.
- See kitchen wall tiles.
Floor, outside
Not this tile
- A wall tile is not made to be walked on. For the floor take the 300×300 piece of the same series: 393 floor matt.
See the 300×450 range: wall tiles 300×450. For wet rooms: bathroom wall tiles.
This piece and its partner
| 393 LT | 393 DK | |
|---|---|---|
| Job on the wall | The light field: most of the wall | The dark band: one or two rows |
| How much you buy | Most of the boxes | A few boxes |
| Size and box | 300 × 450 mm, 6 per box | 300 × 450 mm, 6 per box |
Series 393 is the set with a matt floor: a light tile with a faint wave, a dark band, the dolphin highlighter and the 393 floor matt for wet floors. Buy the pieces from one batch.
A wall tile sticks well only on a flat, dry wall
- 1. Flat, dry wall first. Let a repaired or leaking wall dry fully (test by touch and colour); a wet wall lets go of the tile. In a bathroom, waterproof first.
- 2. Intero Grip+ is the adhesive for this size. TileStix Intero Grip+ (TX2) is Birla White's adhesive for indoor ceramic tiles up to 450×450 mm, and it is the one on our shelf. See TileStix.
- 3. Start from a level line. Snap a level line one tile up from the floor and build upward, so a bent floor does not tilt the rows.
- 4. Narrow joints. TileLynk grout fills joints of 1 to 6 mm. Match the grout colour to the tile; see TileLynk.
- 5. Putty never goes under a tile. Putty is for walls that will be painted.
More: how to lay tiles.
How many boxes of 393 LT
A box covers 8.72 sq ft. Add 10% for cuts and breakage (usual practice; 15% if the tiles go diagonal). Thickness is printed on the box; send us a photo of the box and we will read it out.
Wall area 100 sq ft. With extra: 110 sq ft.
You need
Prices are from our latest bill and change often. Please confirm today's rate on WhatsApp or call before buying.
393 LT 300×45013 boxes78 tiles. 113.4 sq ft covered.Ask today's rate per box · see today's rateYour own measure counts: measure the surface to be tiled, not the carpet area. Full calculator: tile calculator.
What to order with it
Tiles are priced per box. Today's price: tile rates.
Questions people ask
Which floor goes with 393 LT?
The 393 floor matt, a 300×300 tile that our bill marks matt, which is the first pick for a wet bathroom floor.
Is the wave strong?
No, it is faint. From a distance the wall reads as a light plain wall with a soft movement.
Cement or adhesive for this tile?
Adhesive. TileStix Intero Grip+ (TX2) is for ceramic tiles up to 450×450 mm indoors, and it is the one on our shelf. See cement or adhesive.
How many boxes for a 10×10 ft of wall?
The area is 100 sq ft. Add 10%: 110 sq ft. Divide by 8.72: 12.6, so 13 boxes, which is 78 tiles. Use the calculator above for your own size.
Works at our Reva Road store, Muzaffarpur. Box contents and finish on this page come from our own tile list and bills and, where Birla Pivot prints them, its catalogue; the laying advice from Birla White's adhesive range. Anything the maker does not print, the page says where to read it.
Where the facts come from
- Our own tile list and Birla Pivot bills: design name, size, box contents and finish where the bill states it. The tiles page lists all designs: tile designs.
- Birla Pivot, tiles catalogue, where the design is printed; the colour on this page is a drawn swatch, not a photo.
- Birla White, TileStix adhesive and TileLynk grout range: Intero Grip+ for indoor ceramic up to 450×450 mm; TileLynk for joints 1–6 mm.
- 10% extra for cuts is usual tiling practice, not a maker's figure.
Want to see it before you buy?
Come to the store at Reva Road to see our sample piece, or send your room size on WhatsApp and we will send the box count and today's price.