Tata Tiscon 550SD sariya in Muzaffarpur, from our Rewa Road store
Yes. We sell genuine Tata Tiscon 550SD with a GST bill, in 6, 8, 10, 12 and 16 mm, at our store on Reva Road (199 Patahi Rd, near Shiv Mandir, Bhagwanpur), Mon to Sat, 8 am to 6 pm. We sell by weight, so today's rate is per kg, per quintal and per 12 m bar.
We quote our own rate with a date on the sariya rate page. Tata's own price page works by district and did not show a number when we checked, so a dated store rate is the number you can actually use.
Five sizes of Tata Tiscon, with the weight of each
Sariya is sold by weight, so know what one bar should weigh. These are the standard weights from the IS 1786 formula (diameter squared divided by 162). Real bars sit a little either side.
| Size | Per metre | 12 m bar | Usual use | Our rate | In stock |
|---|---|---|---|---|---|
| 6 mm | 0.222 kg | 2.67 kg | Rings, chhajja, lintel, parapet | Ask rateper kg | — |
| 8 mm | 0.395 kg | 4.74 kg | Rings, light slab | Ask rateper kg | — |
| 10 mm | 0.617 kg | 7.41 kg | Slab | Ask rateper kg | — |
| 12 mm | 0.889 kg | 10.67 kg | Slab, beams | Ask rateper kg | — |
| 16 mm | 1.580 kg | 18.96 kg | Beams, columns | Ask rateper kg | — |
"Usual use" is common practice. Your engineer's drawing decides the size, spacing and grade for your house. Rates are filled from today's rate page, and stock from our bill book.
Tiscon 550SD against the legal minimum
These are Tata's own figures from its 550SD page, set beside the IS 1786 minimum that every TMT bar in India must meet.
Strength: yield at least 570 MPa
- Yield is the load at which the bar starts to stretch for good. Tata states a minimum of 570 MPa; the standard asks 550.
- Tensile strength at least 655 MPa, or 15 percent above yield, whichever is higher.
Ductility: stretches before it breaks
- Elongation at least 16 percent (BIS minimum 14.5). A ductile bar bends and warns before it fails, which is why it is the grade for earthquake design under IS 13920.
- Muzaffarpur is in a high seismic zone, so this matters more than a small price gap.
Chemistry and tolerance
- Sulphur and phosphorus each under 0.04 percent, together under 0.075, carbon at most 0.25. Less of the first two means less brittle steel.
- Weight tolerance: Tata states plus or minus 5 percent up to 10 mm and 3 percent for 12 and 16 mm; the BIS limits are 7 and 5.
Five checks that work for any Tiscon seller, including us
A bar sold as Tiscon should prove it in your hand. These take ten minutes.
- Read the bar"Tata Tiscon" and the grade 550SD should be embossed on the bar itself. Tata names this as its genuine check. Plain unmarked bar is not Tiscon, whatever the seller says.
- Look at the ribsEven spacing, two long ribs, no flattened or worn patches.
- Weigh one barTake a 12 m bar and compare its weight with the table above. At the store we will weigh it with you. A bar well under weight means you are paying for steel you do not get.
- Ask for the GST billIt should name the item, the size and the kilograms. No bill, no claim.
- Call TataThe toll-free helpline 1800-108-8282 and the dealer locator on tatatiscon.co.in answer questions about the product and about any seller.
We sell genuine Tata Tiscon with a GST bill, and we do not ask you to take our word. The mark on the bar and the bill in your hand are the proof. How to spot fake Tata Tiscon.
Rate, bill, cutting and delivery
The rate
- Per kg, per quintal and per 12 m bar, from one dated rate.
- Check it on the sariya rate page, or ask on WhatsApp with size and quantity.
- Work out how much you need with the sariya calculator.
The bill
- GST bill on every sale, with size and kg.
- Sold by weight, so what is weighed is what you pay for.
- Different sizes can go on one bill.
Cutting and delivery
- Cut to length on request. Cutting and delivery are charged separately from the steel; ask for the amount for your site.
- Delivery and transport across Muzaffarpur and the blocks.
- Send photos of the bar-bending or slab on WhatsApp before dhalai and we will look at them with you.
Every Tata Tiscon product page
Prices are from our latest bill and change often. Please confirm today's rate on WhatsApp or call before buying.
Tata Tiscon 550SD, all sizesFull page: sizes, weights and today's rateAsk today's rateper kg Tata Tiscon 6 mmRings, chhajja, lintel, parapet₹ 79per kg Tata Tiscon 8 mmRings and light slabAsk today's rateper kg Tata Tiscon 10 mmSlab bar₹ 77per kg Tata Tiscon 12 mmSlab and beams₹ 77per kg Tata Tiscon 16 mmBeams and columns₹ 77per kgNot on this shelf? Other sizes and sariya accessories we can order for you; ask on WhatsApp for the time it takes. Tata Superlinks (ready-made rings) are on request. Rings are normally bent from 6 or 8 mm bar. Our store · all rates · all steel.
Short answers
Do you sell Tata Tiscon in Muzaffarpur?
Yes. We sell genuine Tata Tiscon with a GST bill. We have Tata Tiscon 550SD in 6, 8, 10, 12 and 16 mm at our Rewa Road store, with a GST bill. Come and look at the bar, or send the size and quantity on WhatsApp.
What is the Tata Tiscon rate today?
Our dated rate is on the sariya rate page, per kg, per quintal and per 12 m bar. Tata publishes a recommended consumer price by district, but the page showed no figures when we read it, so we give our own rate with the date.
How do I know the bar is genuine Tata Tiscon?
Look for "Tata Tiscon" and the grade embossed on the bar, weigh one bar against the table on this page, and ask for the GST bill. Tata's helpline is 1800-108-8282.
What does 550SD mean?
550 is the minimum yield strength in MPa; SD is Tata's name for super-ductile, a bar that stretches before it breaks. Tata states at least 16 percent elongation. More in Fe 500, 500D, 550D.
Is Tiscon better than other bars?
Tata's figures beat the BIS minimum by a modest margin on yield, elongation and weight tolerance. For a plain one-storey house the drawing matters more than the brand. See Tata Tiscon vs Saluja Gold.
Do you cut and deliver?
Yes, on request. Cutting and delivery are charged separately from the steel; ask for the amount for your site. Details on delivery.
Can you get Tiscon 20 mm, 25 mm or Superlinks rings?
We can order them for you. Ask on WhatsApp for the time it takes. For ordinary house rings, 6 or 8 mm bar is bent to size.
Why do you sell by kg and not by piece?
Steel is paid for by weight, and no two bars weigh exactly the same. The per-piece figure is for planning only; the bill is by weight.
Abhishek is our cement, steel and building specialist at the Reva Road store in Muzaffarpur. The figures on this page come from Tata's own pages, read on 12 Nov 2026. Where they are unclear, the page says so.
Where the numbers come from
- Tata Tiscon, Tata Tiscon 550SD page: yield 570 MPa, UTS 655 MPa or 15% above yield, UTS/YS 1.15, elongation 16%, S and P under 0.04%, carbon 0.25%, weight tolerance, IS 1786:2008 and IS 13920:2016 comparison, embossed-mark check, helpline 1800-108-8282.
- Tata Tiscon, Dealer locator: search by state then district; no results shown without a search.
- Tata Tiscon, Recommended consumer price: by district; no figures showed when we read it.
- Weight per metre: IS 1786 formula, diameter squared divided by 162, as quoted in standard practice.
Send us your size and quantity
We will reply with today's Tata Tiscon rate and the bill amount on WhatsApp.