Sariya questions answered: rate, units, sizes, weight, grades, rust, genuine
Sariya is sold by weight, so the rate per kg is the number to compare. A quintal is 100 kg, a tonne is 1,000 kg, and a 12 m bar of 12 mm is 10.66 kg. Everything below is short, and each answer links to the full page.
Rate and price 13
Rates are not printed on this page: a number without today's date is wrong within days. Our dated rate is on the rate page.
What is today's sariya rate? (aaj sariya ka rate kya hai)
Our dated rate is on the sariya rate page: Tata Tiscon and Saluja Gold, 6 to 16 mm, per kg, per quintal and per 12 m bar. For your size and quantity, ask on WhatsApp and we reply with the day's rate and the total.
Sariya, saria, sarya, chhad, loha, TMT: are they the same thing?
Yes. All of them mean the steel bar that goes into RCC. "Loha" and "chhad" are the old words; "TMT" is the process that makes today's bar (thermo-mechanically treated). "TOR" is an older, different bar, see the grades section.
Sariya kitne rupaye kilo hai?
Sariya is sold by weight, so the rate is quoted per kg, and it changes with size, brand and day. Jindal Panther's trend post gives a national band of ₹55 to 75 per kg, which shows why no national number is your price. Use the dated rate page, with GST added.
How do I change a rate per kg into quintal, tonne or piece?
Per kg × 100 = per quintal. Per kg × 1,000 = per tonne. Per kg × the bar's weight = price of one 12 m piece (a 12 mm bar is 10.66 kg). To go the other way, divide. The conversion page does both and compares two quotes.
How many kg in a quintal and in a tonne?
A quintal is 100 kg. A tonne is 1,000 kg, which is 10 quintal. A 12 mm bar of 12 m weighs 10.66 kg, so about 9.4 such bars make one quintal.
One shop quoted per piece. How do I compare it with a per-kg rate?
Divide the piece price by the bar's weight (12 mm: 10.66 kg) to get the rate per kg, and add GST if it was left out. Then ask two things: is it a full 12 m, and what does it weigh? A cut or light piece sold at the same price makes every kg dearer.
Does the rate include GST?
GST on TMT bars and binding wire is 18% (HSN 7214 and 7217 on our bills). Ask every shop whether the quote is with or without it, and add 18% to compare. Our bill shows the item, size, kg and the GST. More: GST on cement and sariya.
Can I get a lower rate on a big order?
Tell us the whole quantity and the stages (neev, column, chhat) on WhatsApp, and ask. Compare quotes on the same footing: same size, same brand, GST, cutting and delivery. The cheapest per-kg quote is not the cheapest if cutting, carrying or short weight are extra.
Why is the rate different in Patna, Muzaffarpur and the next shop?
Five things differ: the brand and grade, the freight from the plant, the dealer's margin, whether GST is in the quote, and the day. Quotes per piece and per kg also look different for the same steel. Same size, same brand, same day, with GST: only then is a gap real.
Why does the sariya rate change every week?
Jindal Panther lists seven drivers: iron ore, coking coal, the October to March building season, infrastructure demand, China, GST at 18% and the rupee. So a rate is only good for the day it is dated. Detail: why the sariya rate changes.
When is the best time to buy sariya?
Nobody can call the bottom. Jindal's post says rates tend to run higher from October to March. The practical rule: do not buy 4 tonnes on day one. Steel left out through a monsoon rusts, and the rate moves between stages, so buy each stage when it starts. See when to buy.
Why not trust "sariya ka rate today" pages online?
Several we read show a table with no date, no Bihar town, or no table at all. A rate is only useful if it says which brand, which size, with or without GST, and which day. That is how our rate page is written.
Are cutting and delivery in the rate?
No. Cutting and delivery are charged separately from the material price. Ask for the amount for your site on WhatsApp. See cutting and delivery and delivery.
Units, sizes and soot 11
Weights are the standard figures from IS 1786 (diameter squared ÷ 162), the same for every brand.
How much does one 12 m bar weigh, size by size?
Standard weight, kg per 12 m bar: 6 mm 2.66, 8 mm 4.74, 10 mm 7.40, 12 mm 10.66, 16 mm 18.96, 20 mm 29.64.
| Size | kg per 12 m bar | kg per metre | Bars in 1 quintal |
|---|---|---|---|
| 6 mm | 2.66 | 0.222 | 37.5 |
| 8 mm | 4.74 | 0.395 | 21.1 |
| 10 mm | 7.40 | 0.617 | 13.5 |
| 12 mm | 10.66 | 0.888 | 9.4 |
| 16 mm | 18.96 | 1.58 | 5.3 |
| 20 mm | 29.64 | 2.47 | 3.4 |
How is the weight per metre worked out?
Weight per metre = D × D ÷ 162, with D the bar size in mm. For 12 mm: 144 ÷ 162 = 0.888 kg. Any length: multiply by the metres. An 8 mm ring cut 1.1 m long: 64 ÷ 162 × 1.1 = 0.43 kg. The weight chart explains where 162 comes from.
How much is a bar per foot?
Per foot: 6 mm 0.068 kg, 8 mm 0.120, 10 mm 0.188, 12 mm 0.271, 16 mm 0.482. A foot is 0.3048 m.
How long is a sariya bar?
12 m, about 39 ft 4 in. On a narrow village road that is hard to carry, so we cut bars to the lengths on your list before they leave. See cutting and delivery.
What is "soot" in mm? (3 soot, 4 soot, 5 soot)
Masons count in soot, and the old unit is 1/8 inch, about 3.2 mm. That makes 4 soot about 12 mm and 5 soot about 16 mm. One online guide says 1 soot is 4 mm, so sources disagree: say the size in mm on your list and on the bill.
| Mason says | Usually means |
|---|---|
| 2 soot | about 6 mm |
| 3 soot | about 10 mm |
| 4 soot | about 12 mm |
| 5 soot | about 16 mm |
Which mm sariya goes where in a house?
Usual practice: 8 mm for rings, 10 and 12 mm for the slab, 12 mm for beams in a small house, 16 mm and up for columns, main beams and footings, 6 mm for chhajja and small lintels. Your engineer's drawing decides. See which mm where.
Can I use 6 mm instead of 8 mm for rings?
Only if the engineer drew it. Some drawings do use 6 mm rings, and that is fine when drawn. Never go thinner than the drawing, and do not widen the spacing to save steel.
Which sizes do you have, and can you get 20 or 25 mm?
In our yard: Tata Tiscon and Saluja Gold in 6, 8, 10, 12 and 16 mm. 20 mm, 25 mm and other sizes we can order for you; ask on WhatsApp for the time it takes.
How many bars are in a bundle?
It differs by maker and size, and online sources disagree (for 12 mm, one says 5 to 7, another 10 to 12). We sell by weight, so the bill gives size, pieces and kg. Use the bundle count for planning only.
Does a 12 mm bar weigh the same in every brand?
The standard weight is the same, 10.66 kg for a 12 m bar. A real bar can sit a little above or below, within what IS 1786 allows. That is why weighing is the honest check, see the quality section.
How much lighter can a bar be and still pass?
For a 12 m bar of 12 mm, IS 1786 (Table 2) lets several bars average between 10.12 and 11.19 kg, and one bar on its own go down to 10.02 kg. Thinner bars get more room, in percent. Lighter than that, and the bar is below standard.
How much sariya 10
The figures are planning figures for a frame house. The bar bending schedule from your engineer is the real list.
How much sariya does a 1000 sq ft house need?
JSW's home guide gives 3.5 to 5 kg of steel per sq ft of built-up area. So 1000 sq ft takes 3,500 to 5,000 kg, which is 35 to 50 quintal. A single storey sits towards the low end. Detail: sariya kitna lagega.
And for a G+1 house?
Two floors of 1000 sq ft are 2000 sq ft of built-up area, so 70 to 100 quintal by the same rule. The ground-floor columns and footings carry the floor above, so a G+1 sits towards 5 kg per sq ft.
Does a brick-wall house need less steel?
Yes, much less, because the walls carry the load and the steel goes mostly into the slab and the bands. No steel maker publishes a figure for it; building websites quote around 2.5 to 3 kg per sq ft, which is a guess. Take the list from your engineer.
How much of it goes into the slab?
As a usual planning split, about 45% of the total goes in at the chhat: 1,575 to 2,250 kg of a 1000 sq ft house. Neev is about 25%, columns about 20%, lintel about 10%. This is the usual split, not a maker's figure. See chhat mein kitna sariya.
Should I buy it all at once?
No. Most houses are built in four orders: neev, column, lintel, chhat. Buy each when its stage starts. You avoid rust from long storage and you do not carry the rate risk for the whole house.
What is a bar bending schedule?
A table from your engineer's drawing: for each bar, the size, length, number of pieces and the bends. It already counts laps and cut pieces. Send it to us on WhatsApp and we prepare the cut list. See bar bending schedule.
How many rings (stirrups) do I need?
Count them from the spacing on the drawing; rings are closer near beam and column joints. Saving a little on rings by widening the spacing is the one saving not worth making. Rings are bent from 6 or 8 mm bar. See why rings matter.
How much binding wire do I need?
Binding wire is sold per kg and goes on the same delivery as the steel. The quantity depends on the cage and slab mesh in your drawing; send us the list and we will tell you. See binding wire.
Do I add extra for waste?
No extra on top of a proper bar bending schedule, as it counts laps and cut pieces. Ask us to cut to the list, so offcuts do not pile up on your site.
Is there a calculator?
Yes, the sariya calculator turns your area or drawing into kg, quintal and 12 m bars.
Grades and types 8
IS 1786 is the Indian standard for TMT bars. The grade number is the minimum yield strength.
What do Fe 500, Fe 500D and Fe 550D mean?
"Fe" and the number are the minimum yield strength in N per sq mm: 500 or 550. "D" means a ductility grade: it stretches before it breaks and has tighter limits on sulphur and phosphorus. Fe 550D asks a higher yield (550) than Fe 500 and 500D (500).
What is the "SD" in Tata Tiscon 550SD?
Tata calls it "super ductile": a Fe 550D bar. Tata's sheet gives a yield of at least 570 MPa, against the 550 of the standard. In Tata's range the 6 mm size is Tiscon 500D, not 550SD.
Which grade should a house in Muzaffarpur use?
North Bihar is a high earthquake zone (zone IV in IS 1893), and for a framed house engineers usually ask for a D grade. The drawing names the grade. If it does, buy that grade and ask for the mill certificate. See earthquake zone and sariya.
Is a higher grade always better, or worth the extra?
If the drawing names a grade, buy that grade. Putting a stronger bar into a design made for a lower one only adds margin; fewer kg come only if the engineer redesigns for it. Compare: Tata Tiscon vs Saluja Gold.
What is the difference between TMT, TOR and plain bar?
TOR bars were cold-twisted, and lose strength if heated or bent back. TMT bars are cooled in a controlled way so they get a hard skin and a soft core: they bend without cracking. Old masons still say "TOR". Everything we sell is TMT. See TMT vs TOR.
What is Fe 415?
An older, lower grade (415 N per sq mm yield) that is still printed in makers' comparison tables. Most drawings now ask for Fe 500 or above. JSW says Fe 500D saves steel over Fe 415 because less area is needed for the same strength.
What are Fe 600 and CRS?
Fe 600 is a higher-strength grade that JSW and Saluja Gold make. CRS means corrosion-resistant, made by JSW and others. Both only if the drawing asks. We can order them; ask on WhatsApp for the time it takes.
Which grades do you keep?
Tata Tiscon 550SD, and Saluja Gold Fe 500, in 6, 8, 10, 12 and 16 mm. Our Saluja stock is Fe 500, not 500D. Fe 500D or another grade: we can order it, and ask for the mill certificate of the lot.
Genuine, weight and rust 10
Three checks that cost nothing: read the bar, look at the rust, weigh one.
How do I know a bar is genuine? (asli ya nakli)
Four checks: the brand name and grade rolled into the bar along its length; a tag on the bundle with maker, size, grade and batch; the bar's weight against the table above; a GST bill with the brand written on it. A plain unmarked bar has nothing to check against. See asli ya nakli sariya.
What should the bundle tag show?
Maker, size, grade and batch (heat) number, and the ISI mark with the BIS licence number. Tata also puts a holographic "Tag of Trust" on its bundles. If the tag is missing, or the grade on it does not match your drawing, ask before the vehicle leaves.
How do I weigh a bar to check it?
Weigh a full 12 m bar and compare with the table: 12 mm should be near 10.66 kg. For a cut piece, multiply its length in metres by the weight per metre. Measure the length too, bars cut to order can be 75 mm longer or 25 mm shorter. We weigh your delivery and write size, pieces and kg on the bill.
Do I need a mill test certificate?
Ask for it. The certificate for the lot (heat number, chemical and mechanical results) is the real proof of the grade, and your engineer may want it. Retail buyers do not always get one, so ask when you order, not after.
Why does the bill need the brand written on it?
The bill is your proof of what you bought, from where, and when, and it is how a claim is made later. A contractor also needs the GST bill for input credit. Every sale from us has a GST bill with item, size and kg.
Is light rust on sariya a problem?
A thin, even brown film that rubs off with a wire brush is normal on bars kept outdoors, and does not harm the bar. JSW says rust is a surface layer with little effect on quality, and bars can be used if it sands off. Flaking and pitting are different.
When should I send a bundle back for rust?
If the rust flakes off in scales, leaves pits, wears the ribs flat, or the bar weighs clearly less than the table. That rust has eaten steel. Weigh one bar and decide before the vehicle leaves.
How do I clean and prevent rust?
Brush light rust off with a wire brush or sand it. JSW also suggests washing the bars with cement slurry before stacking. Keep bars off the ground and covered, away from wet. Detail: rust on sariya.
How do I store sariya on site in monsoon and fog?
Stack on bricks or wooden sleepers, not on the earth. Cover with a sheet, open at the sides so air passes. Do not leave it where water stands. Tata's Bihar winter guide points the same way: moisture and ground contact do the damage. See storing sariya in rain and fog.
Can I buy unbranded or local-mill sariya to save money?
A bar with no brand, no grade and no licence number cannot be checked against anything. If a bar carries the ISI mark and the licence number, weigh it, and ask for the certificate and a GST bill. The saving is a few rupees per kg; the bar is hidden in the slab for life.
Brands 4
We stock Tata Tiscon and Saluja Gold. The rest we can order.
Tata Tiscon or Saluja Gold?
Tata Tiscon 550SD has the higher yield (570 against 520 MPa on the makers' sheets), a D grade and tighter checks. Saluja Gold Fe 500 is cheaper per kg and meets IS 1786. A framed house, a floor planned above, or an engineer's earthquake detailing points to Tata. Full table: Tata Tiscon vs Saluja Gold.
Which sariya is best in Bihar?
Tata Tiscon is named most often in Bihar guides, then JSW Neosteel, SAIL, Kamdhenu and Jindal Panther. Local names include Magadh and Mahan TMT (Patna), Captain Steel (Bihta), Shyam Steel and Saluja Gold (Giridih). The name matters less than the checks: licence mark, a D grade, right weight, fresh stock, a proper bill. See best sariya in Bihar.
Can you get SAIL, JSW, Kamdhenu or Jindal?
Yes, we can order it for you. Ask on WhatsApp for the brand, size and the time it takes.
My neighbour used a cheap bar and nothing happened. Is that proof?
No. A bar sits hidden in the slab and shows nothing until the load or the earthquake comes. Proof is the weight, the mark, the grade and the paper at the time of purchase, not a neighbour's house.
Cutting, delivery and ordering 8
Can you cut sariya to length?
Yes. Send the list on WhatsApp: size, length, number of pieces. Cutting is charged separately from the material; ask for the amount. See cutting and delivery.
Can you deliver to my site or village?
Yes. Delivery is charged separately; ask for the amount for your site and see delivery and transport. The bill shows weight and GST.
Can someone check my slab steel before dhalai?
We do not promise site visits. Send photos of the bars on WhatsApp before dhalai, and we look at them with you: sizes, spacing, cover blocks, laps and rings against the drawing. It does not replace your engineer.
Will you weigh my delivery?
Yes. We weigh it and write the size, pieces and kg on the bill. Check it before the vehicle leaves.
I bought sariya elsewhere. Can you check it?
Bring a piece, or send a clear photo of the markings and the bundle tag on WhatsApp. We read the mark and weigh it with you.
Do you sell ready-made rings?
Tata Superlinks (factory-made rings) we do not stock. We bend rings from 6 or 8 mm bar to your size; bending is charged separately. Ask on WhatsApp.
How do I order?
Send size, quantity and your site on WhatsApp, 90310 74624. We reply with the day's rate, GST, cutting and delivery, and the total. The rate page has a button with your size filled in.
Where is the store, and when is it open?
199 Patahi Rd (Reva Road), near Shiv Mandir, Bhagwanpur, Muzaffarpur 843113. Monday to Saturday, 8 am to 6 pm. Call 90310 74624.
Abhishek is our cement, steel and building specialist at the Reva Road store in Muzaffarpur. Weights come from IS 1786 and the makers' own sheets, read on 12 Nov 2026. Where sources disagree, the answer says so and gives the safer figure.
Where the numbers come from
- BIS, IS 1786:2008: weight per metre (Table 1), weight limits (Table 2), cut-length limits (clause 7.1), grades Fe 500, 500D, 550D.
- JSW Neosteel, FAQs (grades, rust, genuine check) and How much steel for a house (3.5 to 5 kg per sq ft, bar sizes by use).
- Tata Tiscon, 550SD page: 570 MPa yield, 16% elongation, embossing and Tag of Trust; rust on TMT rebars and storing in Bihar winter.
- Saluja Gold, comparison leaflet (Fe 500, 520 MPa).
- Jindal Panther, price trend post: seven drivers, October to March peak, GST 18%, national ₹55 to 75 per kg band.
- Also read for comparison: Comaron, sariya ka rate aaj ka (undated tables, no Bihar town), Tata nexarc, what is sariya (D²÷162, MTC, storage). Soot: 1/8 inch rule; Comaron says 4 mm.
- Our own bills: GST 18% on TMT bars and binding wire (HSN 7214, 7217); sizes and grades in stock.
Not here? Ask us.
Send your size and quantity on WhatsApp. We reply with the day's rate, GST, cutting and delivery, and the total.