UltraTech Weather Pro WP+200 in Muzaffarpur: what it is, where it goes, and which pack to buy
Mr Mustafaa, Paint Engineer · checked against UltraTech's Weather Pro brochure and application guide, 13 Nov 2026
The short answer
A liquid for the mixing water, not a paintYou stir it into the water for concrete, mortar and plaster as you build. It works inside the material and cannot be brushed on.
WP+200 is UltraTech's integral waterproofing liquid. Its Water Block Technology fills the tiny pores of concrete, plaster and mortar so they let in less water. The dose is 200 ml for every 50 kg bag of cement, the same for slab, plaster and brickwork: how to measure and mix it.
1–20 L
Packs on our shelf1, 5, 10 and 20 L. UltraTech also makes 200 ml, 50 L and 100 L.
1 L
Covers 5 bagsA 1000 sq ft, 5 inch roof slab is 96 bags: one 20 L can.
10–15%
Less mixing waterUltraTech's figure. Never more than 25 L for one bag.
Schematic, not to scale. The idea is UltraTech's own description of Water Block Technology; the pores are drawn far bigger than they are.
What it is
Waterproofing that goes into the building, and what it can't do
Water travels through concrete and plaster by the tiny channels between the pores. WP+200 is there to block those channels while the material is still wet.
What it is
A specialist integral waterproofing liquid, developed at UltraTech Research Lab, used with cement. One liquid, no second part to mix. UltraTech lists the benefits as better dampness prevention, better protection of the steel from rusting, denser concrete and a more durable house.
How you use it
Dry mix with half the water for 2 to 3 minutes, WP+200 into the other half, then add it to the batch. 200 ml for every 50 kg bag, in every batch. The mix needs 10 to 15% less water. Full steps: dose and mixing guide.
What it is not
Not a paint or coating: brushed on a wall or roof it does nothing. Not a cure for a leak that already exists, and not a replacement for curing: UltraTech asks for good practice including curing. A lower dose, it warns, will not give effective waterproofing.
Ask the mason one thing: "Is the WP+200 going into the water, in every batch?" If the answer is "on top, after", it is the wrong product for that job. For an old leaking roof see roof leaking.
Where it goes
Every stage that uses cement
UltraTech's brochure puts it in concrete, mortar and plaster, from foundation to finishing. In a Muzaffarpur house these places earn it back first.
Stages and the three materials: UltraTech Weather Pro brochure.
1Roof slab: the one job to get rightEvery batch of the dhalai. Stopping halfway or skipping batches leaves the patch that leaks. Waterproofing at chhat dhalai
2Plinth beam and DPC bandWhere the ground is wet or floods, damp climbs the wall from here. Plinth and DPC
4Bathroom, kitchen and parapetThe floor base and the plaster round them. In a bathroom also use a coating under the tiles.
5Repair mortar on an old roofIn the mortar that fills cracks and patches, along with the Hi-Flex coating on top. Roof and terrace
6Foundation concreteUltraTech lists it first. Worth it where the water table is high.
Step 1 and step 2
WP+200 is the inside; the roof still needs a coating
UltraTech sells waterproofing in two steps. Step 1 is WP+200 in the whole structure. Step 2, for the high-risk places (roof, terrace, outside walls, bathroom, kitchen), is a Flex or Hi-Flex coating on top.
Not to scale. Two steps and the protective layer: UltraTech Weather Pro brochure.
1We stock Hi-Flex; Flex we order
Hi-Flex is the flexible coating that goes on the cured, dry slab in two coats. How much, and how to apply: Weather Pro Hi-Flex.
2WP+200 or Weather Plus cement, not both
In the slab use WP+200 with Premium, Super or PPC, or a Weather Plus slab without it. UltraTech gives no advice on using both together, so we don't suggest it.
3Keep the curing
The slab stays wet at least 10 days, 14 in hot dry weather (IS 456). Curing after dhalai.
Packs
Seven pack sizes; four on our shelf
Buy by the cement you will use: 1 litre for every 5 bags. Take one extra litre so a short-fall never means a batch without it.
Pack sizes: UltraTech Weather Pro brochure.
Job
Cement
WP+200
One-room lanter, 12 × 10 ft5 inch
12 bags
2.4 L3 × 1 L
Outside plaster, 1000 sq ft of wall20 mm, 1:4
18 bags
3.6 L4 × 1 L
Plinth beam, 200 running ft9 × 12 inch
35 bags
7 L5 L + 2 × 1 L
Roof slab, 1000 sq ft, 4 inch
77 bags
15.4 L10 L + 5 L + 1 L
Roof slab, 1000 sq ft, 5 inch
96 bags
19.2 L20 L
Keeping itUltraTech's sheets give no shelf life; retailer listings say 24 months. Read the batch date on the can, keep the lid shut and the can out of the sun, and use the oldest can first.
Dr. Fixit LW+?Same 200 ml per bag. If your mason is used to it, use WP+200 the same way: WP+200 vs Dr. Fixit LW+.
Buying it
How to order WP+200 from us
We are an authorised UltraTech Building Solutions store at Reva Road, Muzaffarpur, and every sale carries a GST bill.
Tell us the cement
The number of bags, or the slab, plaster or beam size. The calculator on this page gives litres and packs; send us the list on WhatsApp.
We reply with packs and today's price
Rates change, so the price is given for the day, on WhatsApp or on the waterproofing rates page.
Take it with the cement
Collect from the store or have it delivered with the cement. Delivery is charged separately; ask for the amount for your site, or see delivery.
Photos before the pour
Send photos of the sariya on WhatsApp before dhalai and we will look at them with you. For a size or pack we don't keep, we can order it: ask on WhatsApp for the time it takes.
Your WP+200
WP+200 for the job—200 ml for every 50 kg bag (UltraTech)
Packs to buy—The mix that leaves least over, from the packs on our shelfAsk today's rate
An integral waterproofing liquid from UltraTech. You add it to the mixing water of concrete, plaster or mortar, and its Water Block Technology fills the tiny pores so the material lets in less water. It is not a paint.
How much WP+200 for one bag of cement? (WP+200 kitna dale)
200 ml for every 50 kg bag, as UltraTech's brochure says. Five bags take 1 litre. See the dose guide for mixing and for litres per job.
Where can I use WP+200?
In concrete, mortar and plaster: foundation, plinth beam, columns, beams and slab, brick joining and screed, outside and inside plaster. UltraTech lists all of these.
Which pack sizes do you have?
1, 5, 10 and 20 litres. UltraTech also makes 200 ml, 50 L and 100 L packs; we can order those, so ask on WhatsApp for the time it takes.
Can I paint WP+200 on a wall or roof?
No. It works only mixed into the water of concrete, mortar or plaster. For a coating on a roof, UltraTech's second step is Flex or Hi-Flex: Weather Pro Hi-Flex.
Will it stop my old roof from leaking?
No. It goes into new concrete and mortar. An old leaking roof needs its cracks repaired and a coating; WP+200 can go in the repair mortar. See roof leaking.
Do I still need curing and a coating on the slab?
Yes to both. UltraTech asks for good practice including curing, and for roofs it adds a Flex or Hi-Flex coating as step 2. Keep the slab wet at least 10 days, 14 in hot dry weather.
Should I use it with Weather Plus cement?
In a slab use one or the other. UltraTech publishes no advice on using both together. See Weather Plus.
How long does a can keep?
UltraTech's sheets don't give a shelf life. Retailer listings say 24 months. Check the batch date on the can, and keep it shut and out of the sun.
Do you give a GST bill?
Yes, on every sale. We are an authorised UltraTech Building Solutions store, and delivery is charged separately; ask for the amount for your site.
Mr Mustafaa
Paint Engineer, Tashya Ventures
Paint Engineer at our Reva Road store, Muzaffarpur, and the man customers ask about waterproofing. Every number on this page was checked against UltraTech's own Weather Pro sheets on 13 Nov 2026. Where retailers differ from UltraTech, the page says so.
Where the numbers come from
UltraTech, Weather Pro waterproofing brochure (PDF): integral waterproofing liquid from UltraTech Research Lab; Water Block Technology; 200 ml for every 50 kg bag; method (half the water, then WP+200 in the other half); areas of use (foundation, beams, columns, slab casting, brick joining and screed, internal and external plaster); packs 200 ml, 1, 5, 10, 20, 50, 100 L; Flex and Hi-Flex as the second step for roofs, terraces, outside walls, kitchens and bathrooms.
UltraTech, Weather Pro application guide (PDF): water need falls by 10–15%; a lesser dosage will not give effective waterproofing; good practice including curing; benefits list.
UltraTech, WP+200 product page: the same description in short, with no packs, shelf life or price.
Moglix and other retailer listings of WP+200 (50 L pack; the 24-month shelf life is quoted by retailers, not by UltraTech, so read the batch date on the can you receive). Moglix calls it a coating; UltraTech's own sheets call it a liquid for the mixing water.
Cement quantities for the examples: the dose guide and our cement calculator; IS 456 for curing and the water limit.
Tell us your cement, we'll size the WP+200
Send the bags of cement or your slab size on WhatsApp and get packs and today's price back.