हिंदी Call90310 74624
Home›Guides›Tiles
Labour guide · tiles

Tile laying rate per sq ft in Muzaffarpur: what a mistri charges for floor, wall and 2x4 work

The short answer

A tile mistri quotes per sq ft of tile laid, and the usual quote is labour only: you buy the tiles, cement, sand or adhesive. Behind every quote is one sum:

Rate per sq ft = mistri + helper's pay for a day ÷ sq ft they lay in that day

A plain 2x2 floor goes fastest, so it is the cheapest per sq ft. Wall tiles, 2x4 and plank tiles, and bathrooms full of cuts go slower, so the same mistri asks more per sq ft for them. That is fair, not a trick.

₹25–60
Floor labour, India 2026Published range. Smaller towns sit at the low end.
₹40–50
Wall labour, PatnaThe only published Bihar figure (2022, "tentative").
₹10–12
Legal floor, 2x2 floorBelow this a mistri and helper earn less than Bihar's minimum wage.
Same day's pay, different sq ft
How much a mistri and helper lay in a day, by type of work Floor 2x2: 80 to 100 sq ft a day, rate times 1. Floor 1x1: 70 to 90, times 1.1. Floor 2x4: 60 to 80, times 1.3. Wooden plank: 50 to 70, times 1.5. Wall tiles: 50 to 70, times 1.5. Bathroom floor and walls: 40 to 50, times 2. Fewer sq ft in a day means a higher rate per sq ft. sq ft laid in one day (mistri + helper) rate vs 2x2 0255075100 Floor 2x2 (600×600) 80–100 ×1 Floor 1x1 (300×300) 70–90 ×1.1 Floor 2x4 (600×1200) 60–80 ×1.3 Wooden plank (200×1200) 50–70 ×1.5 Wall tiles (300×450) 50–70 ×1.5 Bathroom, floor + walls 40–50 ×2 Same pay ÷ fewer sq ft = higher rate If 2x2 floor is ₹X per sq ft, expect about 1.5X for walls
Day's output is usual practice for one mistri with one helper on a ready base; your site can be faster or slower. Solid bar = low end, hatched = high end. The "×" column compares the middle of each range with a 2x2 floor.
Six things change the rate

What moves a tiler's rate up or down

Every one of these comes back to the same sum: how many sq ft get laid in a day, and what the tiler has to bring.

1Floor or wall

On a wall each row needs a plumb line and spacers, and the lower rows have to grip before more weight goes on top. A pair lays fewer sq ft than on an open floor.

Wall costs more

2Tile size

A 2x4 (600×1200) tile is heavy, needs two people and a dead-flat bed, and one crack wastes a costly tile. CPWD's own specification for these tiles asks for a zero-chipping diamond cutter, notched trowel, wedges, clips, a levelling system and a rubber mallet.

2x4 and planks cost more

3Cement bed or adhesive

A cement-sand bed hides a rough base but uses more material. Adhesive is a thin, neat layer but needs a flat base first. Many tilers ask a little more per sq ft for adhesive work. Which one you need: cement or adhesive.

Adhesive often a bit more

4Cuts

A 12×14 ft hall is mostly whole tiles. A 5×7 ft bathroom is mostly cuts around the drain, the WC, the door and every corner, plus a slope to the drain. Stairs are cuts on every tread and riser.

Bathrooms and stairs cost more

5Who brings cement, sand, adhesive

The usual quote is labour only. If the tiler brings the cement and sand, or the adhesive and grout, the rate must be higher, and you should know the brand and how many bags go in.

Material inside = higher

6Is the base ready

Uneven slab, plumbing not tested, bathroom waterproofing not done, old tiles still on the floor: every hour spent waiting, chipping or levelling gets charged, or worse, gets skipped.

Unready base costs more

Skirting and stairs are usually quoted differently: skirting per running foot, stairs per step (tread and riser). Ask for those two lines separately so they are not hidden inside the sq ft rate.

Room by room

The same tile costs different labour in different rooms

Ask for one rate per type of work, not one rate for the whole house. The table also shows the legal floor: the lowest rate at which a mistri and helper can earn Bihar's minimum wage.

One floor of a house, by labour effort
Plan of one floor coloured by labour effort Hall 12 by 14 feet and bedroom 10 by 12 feet are plain rooms with few cuts: low effort. Kitchen 8 by 10 feet has cuts around the platform: medium. Bathroom 5 by 7 feet has many cuts and a slope to the drain, and the staircase has cuts on every tread and riser: high effort. Hall 12×14 ft plain, quick Bedroom 10×12 plain passage Kitchen 8×10 cuts at platform Bathroom 5×7 cuts + slope to drain Stairs tread + riser cuts Low effort Medium High High = ask for a separate rate. Grey = kitchen platform.
Drawn to scale, 1 square = 2×2 ft. Bathroom lines from the drain show the slope the tiler has to build in.
WorkDay's outputLegal floor
Floor, 2x2 vitrifiedhall, bedroom80–100 sq ft₹10–12
Floor, 1x1 ceramicsmall rooms, terrace70–90 sq ft₹11–14
Floor, 2x4 vitrifiedtwo people, clips60–80 sq ft₹12–16
Wooden plank 200×1200staggered joints50–70 sq ft₹14–20
Wall, 300×450bathroom, kitchen50–70 sq ft₹14–20
Bathroom, floor + wallscuts, slope40–50 sq ft₹20–25
Skirting4 inch bandQuoted per running foot
Stairstread + riserQuoted per step
How the legal floor is worked outBihar's minimum wage from 1 April 2026 is ₹551 a day for skilled and ₹436 for unskilled work (with dearness allowance), so a mistri and a helper together must earn at least ₹987 a day. ₹987 ÷ the day's output gives the lowest honest rate. Real rates are higher, because a good tiler earns more than the legal minimum. A quote below this line usually means something is left out, or the work will be rushed.
Day's output is usual practiceThese are figures for one mistri with one helper on a ready, level base, cement bed or adhesive. They are our working figures, not a standard. Ask your tiler how much he lays in a day; if his answer is close, his rate per sq ft should follow the same ladder.
What is published

Published labour rates, and the government's rate for the whole job

No tile maker prints a laying rate. These are the figures that are published, with what each one covers. Use them as a frame around your local quotes, not as a quote.

Labour only, published

You buy tiles and material
  • ₹25–60 per sq ft for floor laying in India; ceramic ₹25–40, vitrified ₹30–50 (Houseyog, updated 23 Mar 2026). The same ceramic and vitrified bands appear in a NoBroker answer (Nov 2025).
  • Patna, wall tiles: ₹40 for tiles up to 24×18 inch and ₹50 for bigger ones (Houseyog chart, 22 Jul 2022, marked "tentative").
  • Metros are 15–20% dearer than smaller towns (Houseyog). Muzaffarpur quotes are usually nearer the low end.
None of these sources says how the figure was collected. Read them as a range, then check your quote with the calculator below.

The legal floor, Bihar

Lowest honest rate
  • Skilled ₹551 + unskilled ₹436 = ₹987 a day for a mistri and helper (Bihar minimum wages from 1 April 2026, as reported by WageIndicator and compliance firms).
  • At 80–100 sq ft a day of 2x2 floor that is ₹10–12 per sq ft; for a bathroom ₹20–25.
A rate under the legal floor is a warning sign, not a bargain.

Whole job, government rate

Tile + cement + sand + labour + profit + GST
  • CPWD's Delhi Schedule of Rates 2023 prices the full job, not labour alone. It helps when a thekedar quotes "with material".
  • The gaps between items show what each choice adds. See the table below.
Delhi prices of April 2023, with 18% GST; subject to change. Not a Muzaffarpur rate.
CPWD DSR 2023 item (Delhi, full job)Per sq mPer sq ft
11.37 Ceramic floor tiles 300×300 on 20 mm cement mortar 1:4with cement slurry 3.3 kg/sq m, white cement joints₹1,096.55₹101.9
11.37A Ceramic tiles in dado (walls), skirting, risers on 12 mm mortar 1:3₹1,112.70₹103.4
11.41.2 Vitrified floor tiles 600×600 on 20 mm cement mortar 1:4₹1,553.45₹144.3
11.49.2 Vitrified floor tiles 600×600 on 6 mm tile adhesivegrouting paid separately₹1,725.35₹160.3
11.41A.1.1 Double-charge vitrified 600×600, cement mortar, clips and levelling system₹1,453.65₹135.0
11.41A.1.3 Double-charge vitrified 600×1200 (2x4), same method₹1,577.15₹146.5
11.46.2 Vitrified 600×600 in skirting and step risers, mortar 1:3₹1,623.05₹150.8

Adhesive vs cement bed

Same 2x2 tile: the adhesive job is ₹16 per sq ft more in CPWD's schedule, and that is before grouting, which the adhesive item leaves out.

2x4 vs 2x2

Same method and tile type: 600×1200 is ₹11.5 per sq ft more. Part of that is the dearer tile, part is the slower laying.

Skirting and risers

The same tile on skirting and step risers is ₹6.5 per sq ft more than on the floor, which is why tilers price it separately.

What is inside the rate

Three kinds of quote. Know which one you are being given

Most rows over tiling money start here: the owner heard a labour-only rate, the tiler meant labour plus material, or the other way round.

Cement bed or adhesive: what goes under the tile
Cross-section of a tile on a cement-sand bed and on adhesive Left: tile on a 20 millimetre bed of cement mortar 1 to 4 with cement slurry, which hides an uneven slab. Uses about 2.3 bags of cement and 7 cubic feet of sand per 100 square feet. Right: tile on a 3 to 6 millimetre layer of adhesive spread with a notched trowel, which needs a flat base. Uses about 2 bags of adhesive per 100 square feet at 3 millimetres. Cement bed Adhesive ~20 mm 3–6 mm Sand-cement 1:4 bed Takes up an uneven slab Per 100 sq ft floor: ~2.3 bags cement ~7 cft sand (CPWD figures) Adhesive, notched trowel Needs a flat base first Per 100 sq ft at 3 mm: ~2 bags of 20 kg no sand (Birla White: 55–60 sq ft/bag) White line between tiles = joint, filled with grout or white cement
Layers drawn many times thicker than real. Cement: CPWD DSR 2023 Vol 2, 0.1242 quintal per sq m for a 20 mm 1:4 bed with slurry. Sand worked out from the same 20 mm bed. Adhesive: Birla White Tilestix sheets; large tiles need a thicker bed and more bags.

1. Labour only

The usual quote in Muzaffarpur
LayingCuttingFilling jointsYou buy tiles, cement, sand or adhesive, grout
  • Ask: are skirting, stairs and the bathroom inside this rate, or separate?
  • Ask: does he bring his own cutter, clips and levelling tools? For 2x4, he should.

2. Labour + cement and sand (or adhesive)

Tiler buys the bed material
LayingCementSandYou buy tiles
  • For a cement bed, the rate should go up by the cost of about 2.3 bags of cement and 7 cft of sand per 100 sq ft of floor.
  • Ask the cement brand and the number of bags. Fewer bags than this means a thin bed and hollow tiles later.

3. Full job, tile included

Thekedar quotes everything
TileMaterialLabourHis margin
  • Ask the tile brand, size and grade in writing. Compare the tile part with our tile rates and tile price per sq ft.
  • CPWD's Delhi full-job rate, about ₹135–160 per sq ft for 2x2 vitrified, is a useful ceiling to ask questions against.
Check a quote in a minute

Is the rate you were quoted sensible?

Put in the work, the area and the rate per sq ft you were quoted. You get the labour bill, how long the job should take, what the pair earns in a day, and what you need to buy if the quote is labour only.

Area: measure each room's floor (length × width), or wall height × length minus doors. Our tile calculator gives sq ft and boxes room by room.

Your check

Labour bill—Area × quoted rate
Days for one mistri + helper——
What the pair earns a day—Legal minimum for the pair in Bihar: ₹987 a day (from 1 April 2026)
You buy——
—
Send this to us on WhatsApp

Day's output is usual practice, not a standard. Cement and sand from CPWD's 2023 figures; adhesive from Birla White's 55–60 sq ft per 20 kg bag at 3 mm (we plan with 55). Material prices: cement · sand · tiles and adhesive.

Where owners lose money

Four ways a fair rate turns into a bad bill

₹X "whole house" +₹?

One rate for the whole house

You see: the bathroom charged again at the end

The rate was for plain floors. Ask for a rate per type of work: floor, wall, bathroom, skirting, stairs.

?

Not saying who brings the material

You see: a second bill, or a thin bed

Fix it in words: who buys cement, sand, adhesive, grout. If the tiler does, ask how many bags.

NOT LEVEL

Calling the tiler before the base is ready

You see: lips between tiles, a leak under the bathroom

Level the slab, test the plumbing and finish bathroom waterproofing first. Waiting and chipping are charged.

DHAB-DHAB

Paying in full before the tap test

You hear: a hollow "dhab" under some tiles

Tap every tile with a stick or the back of a trowel. Hollow ones get lifted and relaid before final payment.

Settle it on day one

Five steps before the tiler starts

  1. Measure room by roomFloor and walls separately. The tile calculator gives sq ft and boxes.
  2. Show him a boxTile size, floor or wall, which room. Show the tile and the room.
  3. One rate per work typeFloor, wall, bathroom, skirting (per running foot), stairs (per step).
  4. Say who brings whatCement, sand, adhesive, grout, cutter and clips. Ask how many bags go in.
  5. Pay by finished roomAfter the tap test, joints filled and cleaned. Keep a part until the last room.

Need a tiler? We can give you numbers of tilers who buy from us.

Tell us your area in Muzaffarpur, the tile size and roughly how many sq ft. Before work starts you can also send us photos of the base on WhatsApp and we will look at them with you.

For this job, from our store

Tiles and everything that goes under them

Every item can be ordered. If something is not on the shelf, we order it for you; ask on WhatsApp for the time it takes. How laying is done step by step: tile laying guide.

Intero Grip+ is a Type 1T adhesive for ceramic and semi-vitreous tiles; Vitribind is Type 2T and names vitrified tiles (IS 15477:2019, Birla White sheets). For 2x2 and 2x4 vitrified on adhesive, ask for Vitribind. Box contents from the Birla Pivot catalogue. Cutting and delivery are charged separately; ask for the amount for your site, see delivery.

Questions people ask us

Short answers

What is the tile laying rate per sq ft in Muzaffarpur? (tiles lagane ka rate kya hai)

Tilers charge per sq ft of tile laid, usually labour only. Published 2026 figures for India put floor labour at ₹25–60 per sq ft, and the only published Bihar figure (Patna wall tiles, 2022) is ₹40–50. Smaller towns sit nearer the low end. Wall, 2x4 and bathroom work cost more per sq ft than a plain 2x2 floor. Get two quotes for your own rooms and check them with the calculator above.

Why is 2x4 tile laying costlier?

A 600×1200 tile is heavy and long, needs two people to place, a dead-flat base and levelling clips, and a broken piece is expensive. CPWD's schedule asks for a zero-chipping diamond cutter, notched trowel, wedges, clips, a levelling system and a rubber mallet for it. Fewer sq ft get laid in a day, so the rate per sq ft is higher.

Does the tile mistri supply cement and sand?

Usually not: the common quote is labour only. Some tilers quote with cement and sand. By CPWD's figures a 20 mm cement-sand bed takes about 2.3 bags of cement and about 7 cft of sand per 100 sq ft of floor, so that quote should be higher by about that much. Settle it in words before work starts.

Is wall tile laying costlier than floor?

Usually yes. Each row needs a plumb line and spacers and has to grip before more rows go on, so a pair lays fewer sq ft in a day.

Do I pay extra for cutting in the bathroom?

Often the tiler quotes a bathroom separately because of the cuts, the slope to the drain and the walls. Ask for the bathroom rate up front instead of one rate for the house.

Is laying on adhesive costlier than on cement?

The bag of adhesive costs more than cement and sand for the same area, and many tilers ask a little more for adhesive work. In CPWD's 2023 schedule, 2x2 vitrified on adhesive is ₹16 per sq ft more than on a cement bed, before grouting. Adhesive needs a flat base; a cement bed can take up an uneven one. More in cement or adhesive.

Is the rate for carpet area or for tiles laid?

For the sq ft actually tiled: the floor area of each room, plus wall area for wall tiles. Skirting goes by running foot and stairs by step. Wastage tiles are your cost, not his labour, so do not let the area include them.

Can you give me the number of a tile mistri?

Yes. We can give you numbers of tilers who buy from our Reva Road store. Ask on WhatsApp at 90310 74624 with your area and tile size.

Arun Tiwari
Thekedar, Tashya Ventures

Experienced thekedar who handles construction practice, site work and costs for our Reva Road store, Muzaffarpur. Every figure on this page was checked against the source named below on 12 Nov 2026. The day's-output figures are our own working figures and are marked as usual practice.

Where the numbers come from

  1. CPWD, Delhi Schedule of Rates 2023, Vol. 1, sub-head 11 Flooring: items 11.37 (₹1,096.55/sq m), 11.37A (₹1,112.70), 11.41.2 (₹1,553.45), 11.41A.1.1 (₹1,453.65), 11.41A.1.3 (₹1,577.15) with its tool list, 11.46.2 (₹1,623.05), 11.49.2 (₹1,725.35). Delhi market rates of April 2023, 18% GST included; subject to change.
  2. CPWD, Delhi Schedule of Rates 2023, Vol. 2, coefficients for cement consumption: 0.1242 quintal per sq m for floor tiles on 20 mm mortar 1:4 with slurry; 0.1044 for wall tiles on 12 mm mortar 1:3.
  3. Bihar minimum wages from 1 April 2026 (skilled ₹551, unskilled ₹436 a day with VDA), as reported by WageIndicator and TeamLease RegTech.
  4. Houseyog, Floor tiling cost in India (2026), updated 23 Mar 2026: labour ₹25–60, ceramic ₹25–40, vitrified ₹30–50 per sq ft; metros 15–20% higher.
  5. Houseyog, Cost of wall tiling, rate chart, 22 Jul 2022: Patna labour ₹40 (up to 24×18 inch) and ₹50 (larger), "tentative".
  6. NoBroker forum, What is the cost for laying floor tiles?, answer of 7 Nov 2025: ceramic ₹25–40, vitrified ₹30–50 labour.
  7. Birla White, Tilestix Intero Grip+ and Tilestix Vitribind sheets: Type 1T and 2T (IS 15477:2019), 55–60 sq ft per 20 kg bag at 3 mm with a 6×6 mm notched trowel, 24 h setting time.
  8. Birla Pivot catalogue, box contents (pp. 61–64).

Send us your room sizes

We'll send back the tiles, cement and sand or adhesive for your rooms with today's price, and tiler numbers if you need them.

TASHYABUILDING SOLUTIONS · MUZAFFARPUR
WhatsApp 90310 74624tashyaventures.com