Waterproofing and seelan questions answered: 50 things people ask in Muzaffarpur
- Roof leaks: Hi-Flex, two coats, then a screed; WP+200 in the repair mortar.
- Outside wall wet in rain: Seep Guard Vertical. Damp from the ground: Seep Blocker 2K on the inside face.
- Bathroom: two coats in the sunk floor, two under the tiles, a 48-hour water test between.
- Building now: WP+200 in every batch, 200 ml per 50 kg bag.
- Roof or parapet: Hi-Flex, two coats, then a screed.
- Bathroom floor: Hi-Flex or Seep Blocker 2K, twice, with SBR round the pipes.
- Outside wall in rain: Seep Guard Vertical on the outside face.
- Damp from the ground: Seep Blocker 2K on the inside face.
- Building now: WP+200 in every batch.
Short answers, each with a link to the full page. Rates are never typed here: they come from the counter each morning.
Ask us on WhatsApp
Before building
What goes into the concrete and plaster while the house is open.
Is ordinary cement waterproof?
No. Concrete and plaster have tiny channels that water travels through. That is why UltraTech's plan puts WP+200 into the mixing water of every concrete and plaster job, and then a second layer where water hits hardest.
When should I waterproof a new house?
While you build, not after the first leak. Some jobs can only be done on the day: WP+200 in the neev, plinth beam, columns and slab concrete, and the damp-proof layer. Others close under the next layer: the bathroom coat before tiles, the roof coat before the screed.
How much WP+200 for one bag of cement?
200 ml for every 50 kg bag, as UltraTech says: 1 litre for 5 bags. A lower dose, UltraTech warns, will not give effective waterproofing.
Can I add WP+200 after the slab is cast?
No. It works only mixed into the water while the concrete or plaster is made. A batch without it is where a roof leaks. For a finished roof you need a coating.
How much WP+200 for a 1000 sq ft slab?
A 1000 sq ft, 5 inch slab takes about 96 bags of cement, so about 19 litres: one 20 L can. For the whole house it is about 68 L.
Can I use Weather Plus cement and WP+200 together?
In a given concrete use one or the other. UltraTech publishes no advice on using both together.
Roof and terrace
Leaks, coats, how long it lasts, tiles and the best months.
Water is dripping from my roof. What do I do first?
Switch off the circuit if water is near a light, fan or switchboard. Put a bucket under the drip and move the bed and cupboard. Photograph the stain. Then clear the roof outlet and push standing water towards it, and only after that look for where the water gets in.
Which waterproofing is best for a terrace?
For a roof with cracks, UltraTech Weather Pro Hi-Flex: two coats at least 8 hours apart, then a screed on top. On a sound slab, Birla White Seep Guard Horizontal is the other choice. WP+200 goes into the repair mortar either way.
How long does terrace waterproofing last?
Brand and contractor sites quote roughly 5 to 15 years. It depends more on the roof than on the product: a coating under a screed or tiles, on a roof that drains fully, lasts at the long end; a bare coating in the sun on a roof that holds water lasts at the short end. A warranty is not the same as life.
What should I do every year to make it last longer?
Keep the outlets clear, look at the parapet corners and any cracks before the monsoon, and do not drill or dig into the coated surface. A roof with a screed or tiles over the coating needs the least looking after.
Can I just paint a waterproof coat on a leaking terrace?
Not on its own. A coat is a skin of 0.6 to 0.7 mm. If cracks are open, water stands in low spots, the parapet corner is sharp or the surface is dusty, it fails early. Repair, slope and clean first, then two coats, then a cover.
How many coats of Hi-Flex does a terrace need?
Two, of 0.6 to 0.7 mm each, at least 8 hours apart, the second at right angles to the first (UltraTech). 1 kg covers 14 to 15 sq ft for one coat, so about 1 kg for every 7 sq ft for both.
Do I need a screed or tiles over the coating? What about china mosaic?
UltraTech says a screed or plaster over Hi-Flex is highly recommended: it keeps sun, feet and tank weight off the thin coat. On an old china mosaic roof, take off loose or hollow pieces, fill open joints and cracks with WP+200 mortar and send us photos on WhatsApp before you buy.
Is a cheap yearly coat enough?
A thin patch every year only hides the leak. The cure is the full order: clean, fill cracks, fix slope and outlets, round the parapet corner, two coats crosswise, then a screed.
Will WP+200 stop my old roof from leaking?
No. It goes into new concrete and mortar. An old leaking roof needs cracks repaired and a coating; WP+200 goes in the repair mortar.
Bathroom and kitchen
Which areas, which product, the water test and old bathrooms.
Can the same product be used in the kitchen and the bathroom?
Yes, the same products. A kitchen usually has less standing water, so the treatment can be lighter, but corners, pipe openings and the sink wall still need the coat.
What is the best waterproofing for a bathroom?
No single product does it all. A flexible coating does most of the work: Hi-Flex or Seep Blocker 2K, two coats inside the sunken floor and two under the tiles. WP+200 goes in the screed and Seal & Dry SBR in the mortar that packs the pipes.
Which parts of a bathroom need the coat, and how high on the wall?
The whole floor, twice (inside the sunk part and under the tiles), and at least 1 ft up every wall: Dr. Fixit says 20 cm, Birla White 300 mm, so we use the higher. The wall where you bathe goes to about 4 ft, or to the shower head.
Is there a test before the tiles go on?
Yes. Keep 50 mm of water on the coated floor for 48 hours before anything covers it (Birla White). Check the ceiling below. Once the tiles are on, all of this is buried.
How long before we can use the bathroom?
About four weeks from a bare sunken floor to the first bath, by the makers' sheets: curing and two 48-hour water tests take most of it. Tiles can be walked on 24 hours after fixing with TileStix.
Can an old leaking bathroom be fixed without breaking the tiles?
Sometimes. If water gets in only at open joints and round the floor trap, re-grouting and sealing those spots may stop it. Dr. Fixit warns re-grouting alone rarely stops an existing leak, so check the ceiling below after two weeks. If the stain stays, the floor sounds hollow or a pipe leaks, the tiles come up.
Where does a bathroom usually leak?
Most leaks into the room below come through the gaps: round a pipe, at the floor trap, or where the floor meets the wall. The flat middle of the floor rarely leaks. Packing each pipe sleeve with SBR mortar and a rounded corner fix most of it.
Walls and seelan
Rain on outside walls, damp from the ground, repainting.
My outside wall gets wet in the rain. Which product?
Birla White Seep Guard Vertical on the outside face, and only there. Birla White's 8-year warranty is for outside use with exterior primer and emulsion on top. Fill hairline cracks first.
Which product for damp that comes up from the ground?
Birla White Seep Blocker 2K on the inside face of the wall, taken above the damp mark. Seep Guard is for rain on outside walls and does not fix damp rising inside the wall.
How high does damp climb in Muzaffarpur houses?
Usually 2 to 3 feet above the floor, ending in a wavy line with white salt on it. Damp higher than that on a ground-floor wall usually comes from rain, a pipe or a bathroom.
How do I tell seepage from leakage?
Leakage is water through a gap, such as a roof crack or a broken pipe joint; it drips and shows a wet ring with a clear edge. Seepage soaks slowly through plaster and brick with no visible crack, usually an outside wall in rain, and shows as a dark patch that grows.
Can one product fix every kind of seelan?
No. A roof leak needs a roof coating (Hi-Flex), rain through an outside wall needs an outside coat (Seep Guard Vertical), rising damp needs a coat on the inside of the lower wall (Seep Blocker 2K), and damp from the air needs air and sun, not a coating.
Will repainting fix a damp wall?
No. Paint over a wall that is still taking water only hides it for a season, and it bubbles. Find the water, stop it, let the wall dry, then putty, primer and paint.
Can I put an exterior waterproof base coat on a wall that is damp?
No. Birla Opus's AllDry WallFix 4 must never go on a damp wall, its own sheet says. Dry the wall first and stop the source.
How long after the leak is fixed can I paint?
Let the wall dry fully; test by touch and colour. It is usually a few weeks after the leak is fixed, not a fixed number of days.
Salt and fungus
White salt, black spots and what to do before paint.
Why does white salt come out on my wall?
Water moving through brick and sand carries salt out, and where the water dries the salt stays as a white powder. It is a sign of damp, not a paint fault. Stop the water first, and do not paint over it.
Black spots appear on my walls in the monsoon. Is that a leak?
If they show on many walls at once, in corners and behind cupboards, with a musty smell, it is damp air, not a leak. Air the room on dry days, run the exhaust fan, keep cupboards off the wall, clean the spots, then use waterproof putty.
Does waterproof putty stop seelan?
Not on its own. Birla White says it is not a solution for an active leak. It suits humid air and rain splash on a sound wall.
Tanks and plinth
Water tank, plinth and the damp-proof layer.
Can I waterproof a drinking-water tank with Hi-Flex?
No. Inside a tank that holds drinking water we use UltraTech Weather Pro Single Component, which UltraTech lists as food-grade approved by CFTRI. We order it for you. Hi-Flex is for the outside and the top of the tank.
Does the plinth need waterproofing?
Yes, while it is built. WP+200 goes in the plinth beam concrete and a damp-proof layer is laid on the day. Neither can be added later. This is what keeps ground damp from climbing the walls.
Products and doses
WP+200, Hi-Flex, SBR, Seep Guard, Seep Blocker: what each is and how much.
What is WP+200, and is it a paint?
It is not a paint. It is a liquid you mix into the water for concrete, plaster and mortar. It cannot be brushed on a finished wall.
How much Hi-Flex for a 1000 sq ft roof?
About 134 to 143 kg for two coats: six 24 kg packs. With 1 ft up the parapet it is about 162 kg. A figure of about 70 kg is for one coat only.
What is Seal & Dry SBR for?
It is a rubber liquid mixed into cement, never used alone: a bond coat on old concrete, repair mortar for patches, a thin waterproof skin on a sound base, and packing round bathroom pipes. It is not a coating that stops a leaking roof.
How much wall does a 3 kg pack of Seep Blocker 2K cover?
7.5 sq ft per kg for both coats together, so 3 kg covers only 22.5 sq ft. Work out your wall before you buy, and round up on rough old brick.
How much does Seep Guard Vertical cover?
14 to 25 sq ft per kg: about 14 on a rough or concrete wall, about 25 on smooth plaster. Plan on the lower figure. We keep the 15 kg pack.
How long does a can of WP+200 keep?
UltraTech's sheets give no shelf life; retailer listings say 24 months. Check the batch date on the can, keep it shut and out of the sun.
Cost
How to work out the material cost for your job.
How much does terrace waterproofing cost?
Material cost is kg of Hi-Flex times the day's rate: about 1 kg for every 7 sq ft for two coats, so 134 to 143 kg for 1000 sq ft. Labour and screed are separate and quoted by the mason. Work it out from today's rate rather than from another city's per-sq-ft figure.
How much material does a bathroom need?
A 6 × 8 ft bathroom takes about 210 sq ft of coat counting both layers, so 28 to 30 kg of Hi-Flex: one 24 kg and one 12 kg pack.
What is the waterproofing rate in Muzaffarpur today?
It depends on the product, the pack and the day. Today's price for every pack is on the waterproofing rate board.
Monsoon
What can be done in the rain and what must wait.
Can a roof be waterproofed in the rain?
No. A coating like Hi-Flex needs 8 dry hours before the second coat, and rain on a fresh coat ruins it. In a break in the rain you can only patch: cut the crack into a V and fill it with a cement and SBR mortar. The proper coating waits for a dry roof.
What is the best time to waterproof a terrace?
March to May, before the monsoon. Winter is fine on dry days once the morning dew has gone off the roof.
How long must it not rain after painting the outside?
No rain for 4 days after painting, as the Birla Opus primer sheets say. That is one more reason to finish outside coats before the monsoon.
Buying from us
Rate, bill, delivery and help choosing.
Do you give a GST bill and deliver?
Yes. Every sale has a GST bill. Delivery is charged separately from the material price; ask for the amount for your site.
What if the product I want is not on the shelf?
We keep WP+200, Hi-Flex, Seal & Dry SBR, Seep Guard Vertical and Horizontal and Seep Blocker 2K. Everything else can be ordered: ask on WhatsApp for the time it takes.
I cannot tell where the leak comes from. How do I choose?
Send photos on WhatsApp, before dhalai or before plaster if you are building, and we look at them with you. If you are not building, start with the leak-finding tests.
Every product can be ordered on WhatsApp, and the rate is on the board
Prices are from our latest bill and change often. Please confirm today's rate on WhatsApp or call before buying.
UltraTech WP+200In the mix, 200 ml a bag · 1, 5, 10, 20 LAsk today's rateper 20 LWeather Pro Hi-FlexRoof and bathroom coat · 12, 24 kg₹ 3,665per 24 kgSeal & Dry SBRBond coat and repair mortar · 1, 20 kg₹ 4,807per 20 kgSeep Guard VerticalOutside rain-facing walls · 15 kg₹ 2,467per 15 kgSeep Blocker 2KInside face, damp from the ground · 3 kg₹ 358per 3 kgAnswers paint, putty and waterproofing questions at our Reva Road store, Muzaffarpur. Every figure on this page was checked on 18 Nov 2026 against UltraTech's Weather Pro brochure, Birla White's sheets and our waterproofing pages. Where makers disagree, we give the safer figure and say so.
Where the numbers come from
- UltraTech Weather Pro brochure: WP+200 dose, Hi-Flex coverage, coats, 8-hour gap, screed.
- Birla White sheets: Seep Guard Vertical and Seep Blocker 2K coverage, 8-year warranty, 48-hour bathroom water test.
- Dr. Fixit's bathroom FAQ: wall height, re-grouting.
- Birla Opus sheets: AllDry WallFix 4, no rain for 4 days after painting.
- Our own pages on roof, bathroom, seelan and the products, linked in each answer.
Not here? Ask us
Send your leak or waterproofing question on WhatsApp, with a photo. We answer, and add the question to this page.